RPP50-2424S-1B Recom Power Inc, RPP50-2424S-1B Datasheet - Page 3

• Manufacturer Part Number: RPP50-2424S-1B
• Description: DC/DC Converters & Regulators CONV DC/DC 50W 18-36VIN 24VOUT
• Manufacturer: Recom Power Inc
• Series: Powerline+ RPP50r
• Type: With Remote On/Off and UVLOr

Specifications of RPP50-2424S-1B

• Product: Isolated
• Output Power: 50 W
• Input Voltage Range: 18 V to 36 V
• Input Voltage (nominal): 24 V
• Number Of Outputs: 1
• Output Voltage (channel 1): 24 V
• Output Current (channel 1): 2.1 A
• Output Voltage: 24 V
• Voltage - Input (min): 18V
• Voltage - Input (max): 75V
• Power (watts) - Manufacture Series: 40W
• Power (watts) - Max: 40W
• 1st Output: 24 VDC @ 2.1A
• 2nd Output: -
• 3rd Output: -
• Voltage - Isolation: 3kV (3000V)
• Mounting Type: Through Hole
• Package / Case: 6-DIP Module
• Size / Dimension: 2.00" L x 1.60" W x 0.41" H (50.8mm x 40.6mm x 10.4mm)
• Operating Temperature: -45°C ~ 74°C
• Efficiency: 90%
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

1. Typical values at nominal input voltage and no load/full load.
2. Typical values at nominal input voltage and full load.
3. Typical values for ribbed case at nominal input voltage and full load in vertical orientation and with Eurocard-sized PCB ground planes to assist in heat
dissipation. For horizontal orientation, reduce the maximum temperatures by 10°C.
4. The ON/OFF pin voltage is referenced to negative input. The pin is pulled high internally.
5. Requires an external 100µF/100V low ESR capacitor to meet EN61000-4-4 and EN61000-4-5
6. Case l: 50% Stress, Temperature at 50°C (Ground Benign).
7. To ensure a good all-round electrical contact, the baseplate is pressed firmly into place within the aluminium housing.The hydraulic press can leave
tooling marks and deformations to both the housing and baseplate. The case is anodised aluminium, so there will be natural variations in the case
colour and the aluminium is not scratch resistant. Any resultant marks, scratches and colour varations are cosmetic only and do not affect the
operation or performance of the converters.
Safety Standards
Thermal Cycling
Vibration
Conducted Emissions
Radiated Emissions
ESD
Radiated Immunity
Fast Transient
Surge
Conducted Immunity
MTBF calculated according to BELLCORE TR-NWT-000332
www.recom-international.com
POWERLINE+
DC/DC-Converter
Notes :
Specifications
ON/OFF control is standard with positive logic: e.g. RPP40-2405SW, RPP50-4805S-B.
Add “1” before the suffix for negative logic: e.g. RPP40-2405SW-1, RPP50-4805S-1B.
Positive logic: 0= OFF, 1 = ON. The converter will be ON if the CTRL is left open.
Negative logic: 1 = OFF, 0 = ON. The converter will be OFF if the CTRL is left open.
(5)
External Output Trimming
Refer to Application Notes for
(5)
suggested Resistor Values
(typical at nominal input and 25°C unless otherwise noted)
(6)
REV: 0/2011
EN55022
EN55022
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
W
W
10-55Hz, 12G, 30 Min. along X, Y and Z
RPP50-S
Series
certified UL-60950-1, 1st Edition
complies with MIL-STD-810F
1989 x 10
Perf. Criteria B
Perf. Criteria B
Perf. Criteria B
Perf. Criteria A
Perf. Criteria A
W
PP-39
Class B
Class B
3
hours