USB2507-ADT SMSC, USB2507-ADT Datasheet - Page 16
![IC HUB 7PORT USB COMPATBL 80TQFP](/photos/6/81/68194/usb2507-adt_sml.jpg)
USB2507-ADT
Manufacturer Part Number
USB2507-ADT
Description
IC HUB 7PORT USB COMPATBL 80TQFP
Manufacturer
SMSC
Type
Integrated USB Compatible 3 Port Hubr
Datasheet
1.USB2507-ADT.pdf
(44 pages)
Specifications of USB2507-ADT
Controller Type
USB Hub
Interface
I²C
Voltage - Supply
3 V ~ 3.6 V
Current - Supply
100mA
Operating Temperature
0°C ~ 70°C
Mounting Type
Surface Mount
Package / Case
80-TQFP, 80-VQFP
Operating Supply Voltage
3.3 V
Maximum Operating Temperature
+ 70 C
Minimum Operating Temperature
0 C
Mounting Style
SMD/SMT
Supply Voltage Range
1.62V To 1.98V, 3V To 3.6V
Digital Ic Case Style
TQFP
No. Of Pins
80
Operating Temperature Range
0°C To +70°C
Data Rate Max
480Mbps
Rohs Compliant
Yes
For Use With
EVB-2507 - BOARD EVALUATION FOR USB2507
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
638-1032
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
USB2507-ADT
Manufacturer:
Standard
Quantity:
3 248
Company:
Part Number:
USB2507-ADT
Manufacturer:
MAXIM
Quantity:
43
Company:
Part Number:
USB2507-ADT
Manufacturer:
Microchip Technology
Quantity:
10 000
Part Number:
USB2507-ADT
Manufacturer:
SMSC
Quantity:
20 000
Revision 2.3 (08-27-07)
5.1.1.5
5.1.1.6
5.1.1.7
5.1.1.8
5.1.1.9
5.1.1.10
5.1.1.11
Port Indicators
Controls the use of LED indicator for Port status information. See Section 11.5.3 of the USB 2.0
Specification for additional details.
This field is set by the OEM using either the SMBus or EEPROM interface options. When using the
internal default option, the LED_EN pin enables/disables LED Indicator support.
High-Speed Disable
Allows an OEM to force the Hub to configure as a Full-Speed device only (i.e. High-Speed not
available).
This field is set by the OEM using either the SMBus or EEPROM interface options.
Multiple-TT Support
Selects between a mode where only one transaction translator is available for all ports (Single-TT), or
each port gets a dedicated transaction translator (Multi-TT) {Note: The host may force Single-TT mode
only}.
This field is set by the OEM using either the SMBus or EEPROM interface options. When using the
internal default option, the MTT_EN pin enables/disables MTT support.
EOP Disable
During FS operation only, this permits the Hub to send EOP if no downstream traffic is detected at
EOF1. See Section 11.3.1 of the USB 2.0 Specification for additional details.
This field is set by the OEM using either the SMBus or EEPROM interface options.
Current Sensing
Selects current sensing on a port-by-port basis, all ports ganged, or none.
This field can be set by the OEM using either the SMBus or EEPROM interface options.When using
the internal default option, the SELF_PWR pin determines if current sensing will be ganged, or none
(ganged if self-powered, none if bus-powered)
Downstream Port Power Enabling
Enables all ports simultaneously (ganged), or port power is individually switched on and off on a port-
by-port basis. The ability to support power enabling on a port or ganged basis is hardware
implementation dependent.
This field is set by the OEM using either the SMBus or EEPROM interface options. When using the
internal default option, the GANG_EN pin will configure the hub for ganged or individual port-by-port
port power switching.
Compound Device
Allows the OEM to indicate that the Hub is part of a compound (see the USB Specification for
definition) device. The applicable port(s) must also be defined as having a “Non-Removable Device”.
This field is set by the OEM using either the SMBus or EEPROM interface options.
Note: When configured via strapping options, declaring a port as non-removable automatically causes
the hub controller to report that it is part of a compound device.
DATASHEET
16
Integrated USB 2.0 Compatible 7-Port Hub
SMSC USB2507
Datasheet