PLEY24HSZR-P-U ETA-USA, PLEY24HSZR-P-U Datasheet - Page 2

• Manufacturer Part Number: PLEY24HSZR-P-U
• Description: Linear & Switching Power Supplies 240W 24V 10A
• Manufacturer: ETA-USA

Specifications of PLEY24HSZR-P-U

• Product: Switching
• Output Power Rating: 240 W
• Number Of Outputs: 1
• Output Voltage (channel 1): 24 V
• Dimensions: 247 mm L x 53 mm W x 110 mm H
• Open Frame/enclosed: Open Frame
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

ETA-USA Tel: [phone] Fax: [phone] e-mail: [e-mail]
PLE**HSZ Specification
Specifications<AC/DC>
Output Characteristic
Output Voltage [V]
Output Current [A]
Voltage Adjust Range
Ripple and Noise [mVp-p](maximum) *3
Regulation
Statistic Line Regulation [mV](maximum)
Statistic Load Regulation [mV](maximum)
Temperature Coefficient *4
Drift[mV](maximum) *5
Dynamic Load Regulation [mV](typical) *6
Recovery Time *6
Rise up time
Hold up time
Functions
Overcurrent Protection [A](minimum)
Overvoltage Protection ≧ 110% of Rated
Output Voltage[V]
Remote Sense
Remote On/Off
Environmental
Operating Temperature *7
Operating Humidity
Storage Temperature
Storage Humidity
Withstanding Voltage
Isolation Resistance
Vibration
Shock
Cooling
? Leakage Current
? Line Conducted Noise
? Safety
Weight (typical)
? MTBF [H]
? Switching Frequency[kHz](typical)
Conditions:
*1 at cold start
*2 at AC115/20V and at 25 ℃
*3 measured by a bayonet probe at output connector at 0 to 100MHz bandwidth
*4 at 0 to +50 ℃
*5 for 7hour period after 1hour warm-up at 25 ℃ and rated input/output
*6 when output current changed from 25% and 75% of rated output current rapidly at AC115/230V input
*7 safety approved at 25 ℃
240WATTS(Peak 300-360W)/SINGLE
PLEY**HSZ-U
5-10Hz:10mm double amplitude,10-55Hz:19.6m/s
18.0(Peak 25.0)
PLEY12HSZ-U
Primary-Secondary-Frame Ground 50MΩ(minimum) by DC500V insulation tester
25.15
13.2
220
108
360
12
96
75
1mA(maximum) at 25 ℃ ,rated input/output and rated input frequency
+/- 10% of Rated Output Voltage(at no load within the input range)
Output shutdown(to reset,leave 1minute after shut-off)
Secondary-Frame Ground AC500V for 1minute
500mS(maximum) at 25 ℃ and rated input/output
Primary-Frame Ground AC3,000V for 1minute
20mS(minimum) at 25 ℃ and rated input/output
Primary-Secondary
Current Limiting with automatic recovery
Built to meet FCC Part15-B Class A
0 to +50 ℃ /enclosed type: -5 to +40 ℃
VDE: EN60950,IEC950,VDE0805
30 to 85%RH(non-condensing)
10 to 85%RH(non-condensing)
1,130g/enclosed type:1,260g
Built to meet VDE0871 Class A
CUL: CSA C22.2 No234(Level 3)
2
,20minutes' period for 60minutes each along X,Y,Z axes(non-operating)
10.0(Peak 15.0)
PLEY24HSZ-U
0.5mS(typical)
not available
UL: UL1950
-20 to +85 ℃
Convection
0.03%/ ℃
294m/s
480,000
Model
option
16.2
26.4
340
192
216
135
720
24
90
AC3,000V for 1minute
2
PLEY36HSZ-U
6.8(Peak 10.0)
1080
10.5
39.6
460
288
324
195
36