ENC28J60/SP Microchip Technology, ENC28J60/SP Datasheet - Page 9
![IC ETHERNET CTRLR W/SPI 28DIP](/photos/6/59/65908/150-28-dip_sml.jpg)
ENC28J60/SP
Manufacturer Part Number
ENC28J60/SP
Description
IC ETHERNET CTRLR W/SPI 28DIP
Manufacturer
Microchip Technology
Specifications of ENC28J60/SP
Controller Type
Ethernet Controller, MAC/10Base-T
Interface
SPI
Voltage - Supply
3.1 V ~ 3.6 V
Current - Supply
160mA
Operating Temperature
-40°C ~ 85°C
Mounting Type
Through Hole
Package / Case
28-DIP (0.300", 7.62mm)
For Use With
DM163024 - BOARD DEMO PICDEM.NET 2AC164123 - BOARD DAUGHTER ETH PICTAIL PLUSAC164121 - BOARD DAUGHTER PICTAIL ETHERNET
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Data Sheet Clarifications
The following typographic corrections and clarifications
are to be noted for the latest version of the device data
sheet (DS39662C):
1. Module: Receive Filter
2010 Microchip Technology Inc.
Note:
In Section 8.2 “Pattern Match Filter”, it is stated
that the pattern match offset programmed into the
EPMOH:EPMOL registers should be loaded with
the offset from the beginning of the destination
address field. This implies that any value can be
used. In fact, for correct operation, it is required
that
programmed with an even value only (i.e.,
EPMOL<0> must always be ‘0’).
Corrections are shown in bold. Where
possible, the original bold text formatting
has been removed for clarity.
the
EPMOH:EPMOL
registers
be
ENC28J60
DS80349C-page 9