DP8390DN National Semiconductor, DP8390DN Datasheet - Page 20
![no-image](/images/manufacturer_photos/0/4/469/national_semiconductor_sml.jpg)
DP8390DN
Manufacturer Part Number
DP8390DN
Description
IC NIC (NETWORK INT CTRL)48-DIP
Manufacturer
National Semiconductor
Datasheet
1.DP8390DN.pdf
(56 pages)
Specifications of DP8390DN
Controller Type
Network Interface Controller (NIC)
Voltage - Supply
5V
Current - Supply
40mA
Mounting Type
Through Hole
Package / Case
48-DIP (0.600", 15.24mm)
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
Operating Temperature
-
Interface
-
Other names
*DP8390DN
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
DP8390DN
Manufacturer:
TI
Quantity:
11 688
Part Number:
DP8390DN
Manufacturer:
NS/国半
Quantity:
20 000
10 0 Internal Registers
10 3 Register Descriptions (Continued)
INTERRUPT STATUS REGISTER (ISR)
This register is accessed by the host processor to determine the cause of an interrupt Any interrupt can be masked in the
Interrupt Mask Register (IMR) Individual interrupt bits are cleared by writing a ‘‘1’’ into the corresponding bit of the ISR The INT
signal is active as long as any unmasked signal is set and will not go low until all unmasked bits in this register have been
cleared The ISR must be cleared after power up by writing it with all 1’s
Bit
D0
D1
D2
D3
D4
D5
D6
D7
Symbol
OVW
PRX
RXE
CNT
RDC
RST
PTX
TXE
RST
7
(Continued)
RDC
PACKET RECEIVED Indicates packet received with no errors
PACKET TRANSMITTED Indicates packet transmitted with no errors
RECEIVE ERROR Indicates that a packet was received with one or more of the
following errors
TRANSMIT ERROR Set when packet transmitted with one or more of the
following errors
OVERWRITE WARNING Set when receive buffer ring storage resources have
been exhausted (Local DMA has reached Boundary Pointer)
COUNTER OVERFLOW Set when MSB of one or more of the Network Tally
Counters has been set
REMOTE DMA COMPLETE Set when Remote DMA operation has been
completed
RESET STATUS Set when NIC enters reset state and cleared when a Start
Command is issued to the CR This bit is also set when a Receive Buffer Ring
overflow occurs and is cleared when one or more packets have been removed
from the ring Writing to this bit has no effect
NOTE This bit does not generate an interrupt it is merely a status indicator
6
07H (READ WRITE)
CRC Error
Frame Alignment Error
FIFO Overrun
Missed Packet
Excessive Collisions
FIFO Underrun
CNT
5
OVW
4
20
TXE
3
RXE
2
Description
PTX
1
PRX
0