DP-100-CLEAR 3M, DP-100-CLEAR Datasheet - Page 2

• Manufacturer Part Number: DP-100-CLEAR
• Description: Adhesive; Epoxy; Clear
• Manufacturer: 3M

Specifications of DP-100-CLEAR

• Chemical Component: Epoxy Resin
• Chemical System: Epoxy
• Color: Clear
• Dispensing Method: Syringe
• Primary Type: Adhesive
• Time, Drying: Air Dry for 15 minutes, Force Dry for 10 minutes @ 66 °C +⁄- 5 °C (Aluminum Surface), If 3M™ Scotch-Weld™ Structural Primer 1945 B⁄A is Used, Apply a Thin Coating (0.5 mils) on the Metal Surfaces to be Bonded, Air Dry for 10 minutes, then Cure for 30 minu
• Time, Setting: 15 min. (Aluminum), 10 min. (Steel)
• Weight: 1.7 Oz.
• Lead Free Status / Rohs Status: RoHS Compliant part

Scotch-Weld
Epoxy Adhesives
DP-100 Clear
Product Description
Features
Typical Uncured
Physical Properties
Technical Data
•
3M™ Scotch-Weld™ Epoxy Adhesives DP-100 and DP-100NS are two-part
adhesives offering fast cure and machinability.
Available in larger containers like 3M™ Scotch-Weld™ Epoxy Adhesives 100 B/A
or 100 NS B/A.
DP-100 NS Translucent
• Easy mixing
• High Flow (Scotch-Weld DP-100 Clear)
• Non-Sag (Scotch-Weld DP-100 NS Translucent)
• Fast Cure
• Scotch-Weld DP-100 meets UL 94 HB
1. Viscosity determined using 3M test method C-1d. Procedure involves Brookfield RVF, #6 spindle, 20 rpm and 80°F (27°F).
2. Worklife determined using 3M test method C-548. Procedure involves periodically measuring a 10 gram mixed mass for
3. Gel time determined using 3M test method C-554. Procedure involves periodically checking a 10 gram mixed mass for flowing
Note: The following technical information and data should be considered representative
(100 Clear) and #6 spindle, 4 rpm and 80°F (27°F) (100 NS). Measurement taken after 1 minute.
spreading and wetting properties. This time approximates the usable worklife in an EPX applicator nozzle.
properties.
Product
Viscosity
@ 73°F (23°C)
Base Resin
Color
Net Weight
(Lbs./Gallon)
Mix Ratio (B:A)
Worklife
@ 73°F (23°C)
or typical only and should not be used for specification purposes.
TM
2
1
Base
Accelerator
Base
Accelerator
Volume
Weight
10 g mixed
8,000-15,000 cps
9,000-16,000 cps
Clear/Lt. Amber
DP-100 Clear
Scotch-Weld
Adhesive
5 minutes
9.5-9.9
9.2-9.6
Epoxy
1 : 1
1 : 0.98
DP-100 NS Translucent
5 minutes (Gel time
90,000-150,000 cps
50,000-85,000 cps
Scotch-Weld
Translucent
Adhesive
1: 1
1 : 0.96
9.6-10.0
9.2-9.6
Epoxy
3
)