840-20G MG Chemicals, 840-20G Datasheet - Page 4

• Manufacturer Part Number: 840-20G
• Description: Conductive Coating; Nickel Print; EMI/RFI shield; 3/4 oz liquid
• Manufacturer: MG Chemicals
• Type: Conductiver

Specifications of 840-20G

• Chemical Component: 1-Methoxy-2 Propanone Acetate/2-Heptanone/2-Methylproply Ester Acetic Acid/2-Methoxy-1-Propanol Acetate/2-Propanone/Ethyl Acetate/Ethanol/Nickel/Toluene
• Hydrolytic Stability: Stable at Normal Temperatures and Pressures
• Primary Type: Coating
• Special Features: Repair
• Weight: 3/4 Oz.
• Product: Prototyping/Board Repair
• Size: 0.75 oz
• Lead Free Status / Rohs Status: RoHS Compliant part Hazardous Materials

Section 14: Transportation Information
Ground Canada: (1L and smaller)
Ground USA: - (1L and smaller)
Air: (all sizes).
Sea - All Sizes:
Section 15: Regulatory Information
CANADA
This product has been classified in accordance with the hazard criteria of the Controlled Products
Regulations and the MSDS contains all of the information required by the Controlled Products Regulations.
DSL
WHMIS
Industry and Science Canada
CAA (Clean Air Act, USA)
Health Canada
USA
SARA (Superfund Amendments and Reauthorization Act of 1986, USA, 40 CFR 372.4)
EPCRA (Emergency Planning and Right to Know Act, USA, 40 CFR 372.45
TSCA (Toxic Substances Control Act of 1976, USA)
California Proposition 65 (Chemicals know to cause cancer or reproductive toxicity, May 1, 1997 revision, USA)
Classified as Consumer Commodity. Note: TDG Amendment. Refer to section 1.15, 150 KG gross mass
exemption.
Classified as ORM-D. Refer to USA CFR 49 Regulations.
Shipper must be trained and certified. Refer to IATA Dangerous Goods Regulations.
Shipping Name: PAINT RELATED MATERIAL, UN number: 1263, Class: 3, Packing Group: II, Flash Point: -
18°C. Subsidiary Risk – nil, Recommend using original MG Chemicals certified outer cartons. Tape all seams on
the carton. Hazard Label required – Flammable Liquid. A double arrow orientation label is required and is already
printed on the original outer carton.
Shipper must be trained and certified. Refer to IMDG regulations.
Shipping Name: PAINT RELATED MATERIAL, UN number: 1263, Class: 3, Packing Group: II, Flash Point: -
18°C. Storage category “A”, segregation as for class 9 but away from sources of heat and separated from goods
of class 1 except for those in division 1.4.
All ingredients in this product are listed on the Domestic Substances List
This product belongs to the following categories: B2, D2A
MG Labels products intended for the workplace to conform to WHMIS labeling regulations. Product identification,
net quantity declaration, minimum printing type size heights, and packaging of this product are in compliance.
This product does not contain any class 1 ozone depleting substances.
This product does not contain any class 2 ozone depleting substances.
This product does not contain any chemicals listed as hazardous air pollutants.
Products produced by MG Chemicals intended for retail display conform to the Canadian Consumer Labeling
Regulations.
This product contains Toluene CAS# 108-88-3 (12.8%) and Nickel CAS#7440-02-0 (57%) listed under section
313 as a toxic chemical.
This product contains Toluene, and Nickel toxic chemicals subject to the reporting requirements of section 313
Title III of the SARA of 1986 and 40 CFR part 372.
All substances are TSCA listed.
This product contains Toluene and Nickel, chemicals known to the state of California to cause reproductive toxicity
and cancer respectively.
PAGE 4 / 5
Registered Quality System ISO 9001
MSDS Code: 840 - liquid
Burlington, Ontario, Canada
QMI Certificate #004008