4229-55ML MG Chemicals, 4229-55ML Datasheet - Page 2
![Connector Coating; Naptha, rubber solvent; 2 oz liquid](/photos/33/60/336006/661-0132_large_sml.jpg)
4229-55ML
Manufacturer Part Number
4229-55ML
Description
Connector Coating; Naptha, rubber solvent; 2 oz liquid
Manufacturer
MG Chemicals
Type
Protectiver
Datasheet
1.4229-55ML.pdf
(5 pages)
Specifications of 4229-55ML
Chemical Component
Acetone/Amorphous/Carbon Black/Crystalline Free/Ethyl Benzene/Fumed/Light Aliphatic Solvent Naphtha/N-Hexane/Silica/Xylene
Dispensing Method
Bottle
Primary Type
Coating
Special Features
High Performance
Temperature, Rating
-34 to +93 °C
Time, Setting
4 hrs.
Weight
2 Oz.
Product
Adhesives
Size
2 oz
Lead Free Status / Rohs Status
RoHS Compliant part
Hazardous Materials
Connector Coating 4229
Product Description
MG Chemicals’ Connector Coating is a solvent based, modified thermoplastic liquid coating. Dries to a
durable, flexible rubber-like protective coating.
Product Features
Application
Brushing: Brushing should be reserved for applications that can neither be dipped or sprayed.
Cleaning
Connector Coating may be wiped clean with MG Chemicals Cat No. 435 Solvent Cleaner.
Sample Application
Properties Of Uncured Material
Properties Of Cured Material
Chemical Type
Appearance
Odor
Viscosity
Specific Gravity
Flash Point, TCC, ºF (ºC)
Tensile Strength, ASTM D 882, psi
Dielectric Strength, ASTM D 149, v/ml
Hardness, ASTM D 2240, Shore A
Elongation, ASTM D 638, %
• Coats metal, foam, fiberglass, masonry, rubber, and wood.
• Available in black
• Remains flexible in and resists temperatures from –30 ºF to 200 ºF (–34 ºC to 93 ºC).
• Won’t crack or chip
• Stands up to sun, salt spray and extreme weather
• Excellent chemical resistance
1. Brush surface in one direction only.
2. Several coats are recommended for maximum protection. Allow 20 minutes between coats. Drying
3. Brush can be cleaned with MG Chemicals Cat No. 435
4. Once applied, Connector Coating does not have to be removed for additional coats. New coats will fuse
• Insulating connecting wires
• Joining speaker wires
• Soldering joints
• Repairing wires
• Repairing extension cords
• Protecting screw heads from corrosion
• Coating battery connectors
• ANYWHERE YOU WOULD USE ELECTRICAL TAPE…..AND MORE
time (at 70 ºF) is approximately four hours for each coat applied.
to old coats during air drying.
Naphtha, rubber solvent
Heavy liquid
Moderate
Flow similar to SAE 60 Motor Oil
.92 - .94
<2 (<-17)
2600
300
65 to 75
400 to 500