AZ8
CONTACTS
COIL
MINIATURE
PC BOARD RELAY
FEATURES
• Subminiature size
• High sensitivity, 110 mW pickup
• Coils to 48 VDC
• Hermetically sealed version available
• Epoxy sealed for automatic wave soldering
• Contacts rated at 3, 6 or 10 Amps
• Withstands 6 kV IEEE Lightning Surge (special order)
• Class B insulation (130°C) standard
• Class F insulation (155°C) version available
• UL, CUR file E44211
• VDE approved versions available (Class A Insulation only)
Arrangement
Ratings
Material
Resistance
Power
Temperature
Light Duty
Medium Duty
Heavy Duty
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
SPDT (1 Form C)
SPST (1 Form A) 10 A version only
Resistive load:
Max. switched power: 100 W or 600 VA
Max. switched current: 3 A
Max. switched voltage: 150 VDC or 300 VAC
UL Rating: See chart on Page 3
Max. switched power: 180 W or 1800 VA
Max. switched current: 6 A
Max. switched voltage: 150 VDC or 300 VAC
UL Rating: See chart on Page 3
Max. switched power: 300 W or 2400 VA
Max. switched current: 10 A
Max. switched voltage: 150 VDC or 300 VAC
UL Rating: See chart on Page 3
Light duty: Silver
Medium duty: Silver nickel
Heavy duty: Silver cadmium oxide
< 100 milliohms initially
Standard coil: 210 mW
Sensitive coil: 140 mW
Heavy duty: 228 mW
Class B: 2.0 W 20°C (68°F) ambient
Class F: 2.5 W 20°C (68°F) ambient
At nominal coil voltage
Standard coil: 38°C (68°F)
Sensitive coil: 28°C (50°F)
Max. 105°C (221°F) Class A
Max. 130°C (266°F) Class B
Max. 155°C (311°F) Class F
(110 mW available)
1.6 W 40°C (104°F) ambient
2.1 W 40°C (104°F) ambient
GENERAL DATA
NOTES
Life Expectancy
Mechanical
Electrical Light Duty
Operate Time (typical)
Release Time (typical)
Dielectric Strength
(at sea level for 1 min.) 2500 Vrms contact to coil except hermetically
Insulation
Resistance
Dropout
Ambient Temperature
Vibration
Shock
Enclosure
Terminals
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
Max. Immersion Time
Weight
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Other coil resistances and sensitivities available upon request.
4. Unsealed relays should not be dip cleaned.
5. Specifications subject to change without notice.
Operating
Storage
Medium Duty 1.8 x 10
Heavy Duty
Minimum operations
100 million operations
3 x 10
1 x 10
5 ms at nominal coil voltage
2 ms at nominal coil voltage
(with no coil suppression)
750 Vrms contact to contact
sealed version which is 1600 Vrms
1000 megohms min. at 20°C, 500 VDC,
50% RH
Greater than 5% of nominal coil voltage
At nominal coil voltage
-55°C (-67°F) to 90°C (194°F) Class B
-55°C (-67°F) to 115°C (239°F) Class F
-55°C (-67°F) to 130°C (266°F) Class B
-55°C (-67°F) to 155°C (311°F) Class F
0.062" DA at 10–55 Hz, 10 g at 55–110 Hz
10 g
P.E.T. polyester
Tinned copper alloy, P.C.
270°C (518°F)
5 seconds
80°C (176°F)
30 seconds
8 grams
5
5
at 3 A, 120 VAC
at 10 A, 120 VAC
5
at 6 A, 120 VAC