DP-105 3M, DP-105 Datasheet - Page 6

• Manufacturer Part Number: DP-105
• Description: Epoxy Adhesive DP105 Clear Duo-Pak, 1.7 oz, Clear
• Manufacturer: 3M

Specifications of DP-105

• Chemical Component: Epoxy Resin/Organosilane
• Color: Clear
• Primary Type: Adhesive
• Time, Drying: 48 hrs @ 23 °C
• Weight: 1.7 Oz.

enclosures must be exhausted to outdoors or to a suitable emission control device.
8.2 PERSONAL PROTECTIVE EQUIPMENT (PPE)
8.2.1 Eye/Face Protection
Avoid eye contact with vapors, mists, or spray.
The following eye protection(s) are recommended: Safety Glasses with side shields, Indirect Vented Goggles.
8.2.2 Skin Protection
Avoid skin contact.
Select and use gloves and/or protective clothing to prevent skin contact based on the results of an exposure assessment. Consult with
your glove and/or protective clothing manufacturer for selection of appropriate compatible materials.
Gloves made from the following material(s) are recommended: Polyethylene/Ethylene Vinyl Alcohol.
8.2.3 Respiratory Protection
Avoid breathing of vapors created during cure cycle. Avoid breathing of dust created by cutting, sanding, grinding or machining.
Select one of the following NIOSH approved respirators based on airborne concentration of contaminants and in accordance with
OSHA regulations: Half mask R95 particulate respirator, Half mask or full facepiece air-purifying respirator with N100 particulate
filters, Half facepiece or fullface air-purifying respirator with P100 particulate filters, Half facepiece or fullface air-purifying
respirator with P95 particulate filters, Half facepiece or fullface air-purifying respirator with N95 particulate filters. Consult the
current 3M Respiratory Selection Guide for additional information or call 1-800-243-4630 for 3M technical assistance.
8.2.4 Prevention of Swallowing
Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water.
8.3 EXPOSURE GUIDELINES
SOURCE OF EXPOSURE LIMIT DATA:
_________________________________________________________________________________________________
3M MATERIAL SAFETY DATA SHEET 3M(TM) Scotch-Weld(TM) Epoxy Adhesive DP-105, Clear (Part B)
ORGANOSILANE
Ingredient
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
ACGIH: American Conference of Governmental Industrial Hygienists
CMRG: Chemical Manufacturer Recommended Guideline
OSHA: Occupational Safety and Health Administration
AIHA: American Industrial Hygiene Association Workplace Environmental Exposure Level (WEEL)
Specific Physical Form:
Odor, Color, Grade:
General Physical Form:
Autoignition temperature
Flash Point
Flammable Limits - LEL
Flammable Limits - UEL
Boiling point
Vapor Density
Vapor Pressure
Specific Gravity
CMRG
Authority
TWA
Type
Viscous Liquid
slight epoxy odor, clear
Liquid
>=240 ºF [Test Method: Pensky-Martens Closed Cup]
>=240 ºF
<=27 psia [@ 131 ºF]
1.11 [Ref Std: WATER=1]
No Data Available
No Data Available
No Data Available
No Data Available
5 ppm
Limit
Additional Information
Page
4 of 7