HS9Z-A62 IDEC Corporation, HS9Z-A62 Datasheet
HS9Z-A62
Specifications of HS9Z-A62
Related parts for HS9Z-A62
HS9Z-A62 Summary of contents
Page 1
... Door Interlock Switches HS6E Subminiature Interlock Switches with Solenoid HS6E features: • Compact body: 75 × 15 × 15-mm-wide, thinnest solenoid type interlock switch in the world. • Reversible mounting and angled cable allow four actuator insertion directions. • Energy saving. 24V DC, 110 mA (solenoid: 100 mA, LED: 10 mA) • ...
Page 2
... HS9Z-A61 Do not apply excessive load. The retention force of HS9Z-A62 actuator is 100N maximum. HS9Z-A62 Do not apply excessive load. When retention force of 100N or more is required, use the HS9Z-A62S actuator. The retention force of HS9Z-A62S actuator is 500N maximum. HS9Z-A62S Do not apply excessive load. HS9Z-A65 The HS9Z-A65 and HS9Z-A66 have their metal actuator installed in opposite directions. ...
Page 3
... Door Interlock Switches Specifi cations UL 508 (UL listed), CSA C22.2, No. 14 (c-UL listed), ISO 14119 IEC 60947-5-1, EN 60947-5-1 (TÜV approval), EN 1088 (TÜV approval), Conforming to Standards GS-ET-19 IEC 60204-1/EN 60204-1 (applicable standards for use) Operating Temperature –25 to +50°C (no freezing) Storage Temperature – ...
Page 4
... Inductive load (AC15) 1A Resistive load (DC12) 2A 0.4A Inductive load (DC13) 1A 0.22A Resistive load (AC12) 2.5A 1.5A – Inductive load (AC15) 1.5A 0.75A Resistive load (DC12) 2.5A 1.1A 0.55A Inductive load (DC13) 2.3A 0.55A 0.27A www.idec.com Door Interlock Switches – – ...
Page 5
... Mounting Hole Layout Hole for Manual Unlocking ø12 (reference) (22.5) (22.5) Manual Unlocking Key 4 3-M4 Screw (ø4 tapped hole When using right-angle actuator (HS9Z-A62) 22.6 ±1 (14) Actuator Stop (supplied) USA: 800-262-IDEC Canada: 888-317-IDEC HS6E Series 3-M4 Screw (ø4 tapped hole) 28.5 41 ...
Page 6
... Part Number Manual Unlock Key (long type) HS9Z-T3 370 Actuator Key Dimensions (mm) Straight Actuator (HS9Z-A61) Right-angle Actuator (HS9Z-A62) The retention force of the HS9Z-A62 actuator is 100N. When tensile force exceeding 100N is expected, use the HS9Z-A62S actuator. When mounted (33.8) When mounted (5.6) 0.8 ...
Page 7
... Lock Monitor Circuit (unlocked, NO) Lock Monitor Circuit (locked, NC) The characteristics shown in the chart above are of the HS9Z-A61, -A62, -A65, and -A66 actuators. For the HS9Z-A62S actuator, subtract 0.6 mm. The characteristics show the contact status when the actuator enters an entry slot of an interlock switch. ...
Page 8
... Lock Monitor Circuit (unlocked, NO) Lock Monitor Circuit (locked, NC) The characteristics shown in the chart above are of the HS9Z-A61, -A62, -A65, and -A66 actuators. For the HS9Z-A62S actuator, subtract 0.6 mm. The characteristics show the contact status when the actuator enters an entry slot of an interlock switch. ...
Page 9
... HS9Z-A66). Note: Because deviation or dislocation of hinged doors may occur in actual applications, make sure of the correct operation before installation. When Using the HS9Z-A62/A62S Right-angle Actuator • When door hinge is on the extension line of the interlock switch surface: ...
Page 10
... When installing the HS9Z-A62S actuator, use the mounting plate (supplied with the actuator) on the hinged door, and secure the actuator tightly using Manual Unlocking two M4 screws. ...
Page 11
... Door Interlock Switches Wire Identifi cation • Wires can be identifi color and or a white line printed on the wire. No. Insulation Color No. 1 Blue/White 7 2 Gray 8 3 Pink 9 4 Orange 10 5 Orange/White 11 6 Gray/White 12 Terminal Number Identifi cation • When wiring, identify the terminal number of each contact by the color of the insulation. • ...
Page 12
... Door Hinge HS2B Precautions • Cracks or burrs on the conduit entry may deteriorate the housing protection against water. • When changing to another conduit port, close the unused opening with an optional plug (Part No. HS9Z-P1). USA: 800-262-IDEC Canada: 888-317-IDEC Precautions Door Hinge Door Hinge 397 ...
Page 13
... Cracks or burrs on the conduit entry may deteriorate the housing protection. • When changing to the other conduit port, close the unused opening with an optional plug (accessory). Type No. HS9Z-P1 Manual Unlocking • Remove the screw located on the unlocking entry at the side of the switch us- ing the key wrench included with the switch ...
Page 14
... M4 Phillips screws) The screws are supplied by the user. Applicable Wire Size • HS1C: 0.5 to 0.75 mm 1.0 to 1.25 mm • HS5B: 0.5 to 1.25 mm • HS1E: 0.5 to 1.25 mm HS9Z-A1 Actuator USA: 800-262-IDEC Canada: 888-317-IDEC Precautions (PF13.5): RBC-103PG13.5 G1 max. (Terminals No. (Terminals No.3, 4, and grounding terminal) ...
Page 15
... When the door hinge is on the extension line of the interlock switch surface: Door Hinge • When door hinge is on the extension line of the actuator mounting surface: Door Hinge When using the HS9Z-A55 Angle Adjustable Actuator • When door hinge is on the extension line of the interlock switch surface • ...