DP-110-GRAY 3M, DP-110-GRAY Datasheet - Page 6

• Manufacturer Part Number: DP-110-GRAY
• Description: Adhesive; Epoxy; Gray; Duo-Pak; 1.7 Fluid Ounce Tube
• Manufacturer: 3M

Specifications of DP-110-GRAY

• Chemical Component: Butadiene/Epoxy Resin/Hydrogenated Polyphenyls/Hydrogenated Terphenyl/Methacrylate/Styrene Polymer
• Chemical System: Epoxy
• Color: Gray
• Dispensing Method: Syringe
• Primary Type: Adhesive
• Time, Drying: Air Dry for 15 minutes, Force Dry for 10 minutes @ 66 °C +⁄- 23 °C (Aluminum Surface), If 3M™ Scotch-Weld™ Structural Adhesive Primer EC1945 B⁄A is Used, Apply a Thin Coating (0.5 mils) on the Metal Surfaces to be Bonded, Air Dry for 60 minutes, then Cure
• Time, Setting: 15 min. (Aluminum), 60 min. (Steel)
• Weight: 1.7 fl.oz.
• Lead Free Status / Rohs Status: RoHS Compliant part

5.1 FLAMMABLE PROPERTIES
5.2 EXTINGUISHING MEDIA
Use fire extinguishers with class B extinguishing agents (e.g., dry chemical, carbon dioxide).
5.3 PROTECTION OF FIRE FIGHTERS
Special Fire Fighting Procedures:
self-contained breathing apparatus (SCBA).
Unusual Fire and Explosion Hazards:
Accidental Release Measures: Observe precautions from other sections. Call 3M- HELPS line (1-800-364-3577) for more
information on handling and managing the spill. Evacuate unprotected and untrained personnel from hazard area. The spill should be
cleaned up by qualified personnel. Ventilate the area with fresh air. For large spill, or spills in confined spaces, provide mechanical
ventilation to disperse or exhaust vapors, in accordance with good industrial hygiene practice. Warning! A motor could be an ignition
source and could cause flammable gases or vapors in the spill area to burn or explode. Contain spill. Collect as much of the spilled
material as possible. Clean up residue with an appropriate solvent selected by a qualified and authorized person. Ventilate the area
with fresh air. Read and follow safety precautions on the solvent label and MSDS. Collect the resulting residue containing solution.
Place in a closed container approved for transportation by appropriate authorities. Dispose of collected material as soon as possible.
7.1 HANDLING
Avoid eye contact. Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water. Avoid
skin contact. Avoid breathing of vapors. Keep out of the reach of children. Avoid breathing of dust created by cutting, sanding,
grinding or machining. For industrial or professional use only. Avoid contact with oxidizing agents. Use general dilution ventilation
and/or local exhaust ventilation to control airborne exposures to below Occupational Exposure Limits. If ventilation is not adequate,
use respiratory protection equipment.
7.2 STORAGE
Store away from heat. Store out of direct sunlight. Keep container in well-ventilated area. Keep container tightly closed. Store away
from oxidizing agents.
_________________________________________________________________________________________________
MATERIAL SAFETY DATA SHEET 3M(TM) Scotch-Weld(TM) Epoxy Adhesive DP-110, Gray (Part B) or 3M(TM) Scotch-Weld(TM)
Epoxy Adhesive 110 B/A, Gray (Part B)
SECTION 5: FIRE FIGHTING MEASURES
SECTION 6: ACCIDENTAL RELEASE MEASURES
SECTION 7: HANDLING AND STORAGE
In the event of a release of this material, the user should determine if the release qualifies as reportable according to
local, state, and federal regulations.
Note: See STABILITY AND REACTIVITY (SECTION 10) for hazardous combustion and thermal decomposition
information.
Autoignition temperature
Flash Point
Flammable Limits - LEL
Flammable Limits - UEL
Water may be used to blanket the fire. Wear full protective equipment (Bunker Gear) and a
No unusual fire or explosion hazards are anticipated.
No Data Available
>=480 ºF [Test Method: Closed Cup]
Not Applicable
Not Applicable
Page 3 of 8