OTBA5QD BANNER ENGINEERING, OTBA5QD Datasheet
![no-image](/images/manufacturer_photos/0/0/91/banner_engineering_sml.jpg)
OTBA5QD
Manufacturer Part Number
OTBA5QD
Description
Touch Button, Safety, Momentary Action, 120VAC
Manufacturer
BANNER ENGINEERING
Datasheet
1.OTBA5QD.pdf
(1 pages)
Specifications of OTBA5QD
Brand/series
Opto-Touch™/OTB
Current, Switching
7 A
Function
Proximity
Mounting Type
Threaded
Output
SPDT-NO/NC
Primary Type
Photoelectric
Sensing Mode
Through-Beam
Technology
Photoelectric
Termination
Cable
Voltage, Supply
120 VAC
Voltage, Switching
250/30 VAC/VDC
Lead Free Status / Rohs Status
RoHS Exempt Product
OTB Series
Specifications
Supply Voltage:
Hz), 10 to 30V dc, or 20 to 30V ac/dc (at 25 mA, exclusive of load).
Output Configuration:
AC and ac/dc models: All models have SPDT electromechanical relay
(one N.O. contact, one N.C. contact).
DC-only models:
OTBVN6 models have complementary NPN sinking outputs;
OTBVP6 models have complementary PNP sourcing outputs.
Output Rating:
AC and ac/dc models: Maximum voltage is 250V ac or 30V dc.
Maximum current is 7 amps (resistive load), 1 HP max.
Minimum load is .05 watts (dc), .05VA (ac).
Mechanical life of relay is 50,000,000 operations (minimum).
Electrical life of relay is 100,000 operations (min.) at full resistive load.
Transient suppression recommended when switching inductive loads.
DC models: 150 mA maximum load (each output).
Ambient Light Immunity:
EMI/RFI Immunity:
both single and mixed EMI and RFI noise sources.
Operating Temperature Range:
Indicator LEDs:
is "on"; the other lights whenever the output relay is activated.
Construction:
and fiber-reinforced VALOX
sulated. Totally sealed, non-metallic enclosure. Threaded base has
Banner Optical Touch Buttons are touch-activated photoelectric switches
designed to replace capacitive touch switches and mechanical push buttons.
The OPTO-TOUCH's SPDT electromechanical relay or solid-state output (de-
pending upon model) is activated for as long as a finger, introduced into the "touch
area" (yoke) of the switch, interrupts the OPTO-TOUCH's infrared sensing beam.
Banner Optical Touch Buttons are ergonomically designed to eliminate the hand,
wrist, and arm stresses associated with mechanical push buttons. They require
absolutely no physical pressure to operate. LED indicators light for "power on"
and "output activated".
All models are highly resistant to EMI, RFI, and ambient light interference. OTBs
have either a black polysulfone (or red Lexan
Lexan
considerations for use of the two types differ; see specifications below. The 30-
mm threaded base on all models provides easy mounting, and Banner Optical
Touch Buttons are easily retrofitted to existing machines. See pages 2 and 5 for
model listings.
OPTO-TOUCH
®
models have the letter "L" in their model number suffix. Environmental
Black polysulfone (or red Lexan
Models for 105 to 130V ac, 210 to 250V ac (50/60
Two indicator LEDs. One lights whenever power
The OPTO-TOUCH is highly resistant to
®
base. Electronics fully epoxy-encap-
120,000 lux (direct sunlight).
™
Momentary Action Optical Touch Buttons
-20 to +50 C (-4 to +122 F).
®
) upper housing and VALOX
®
) upper housing
M30 x 1,5 external threads and 1/2" NPSM internal threads. Base
requires a 1-3/16" diameter mounting hole (fits most standard automo-
tive-size "jumbo" legend plates and oiltight pushbutton holes). Sup-
plied with a field cover of polycarbonate-PET polyester. OPTO-
TOUCH OTBs are rated NEMA 1, 3, 4, 4X, 12, and 13.
Cable:
412 4-conductor mini-type cable (p/n 25226); AC and ac/dc Quick-
disconnect (QD) models require MBCC-512 5-conductor cable (p/n
25496; cables are purchased separately). Mini-type QD cables are 12 feet
long. Models with attached cable (non-QD models) are supplied with 6
feet of PVC-jacketed, 22 AWG 4- or 5-conductor cable.
Environmental Considerations
Prolonged exposure of the OPTO-TOUCH to direct outdoor sunlight
will cause embrittlement of the polysulfone housing. Window glass
effectively filters longer wavelength ultraviolet and provides excel-
lent protection from sunlight. Contact the factory Application Engi-
neering Department regarding outdoor applications.
Environmental Considerations
Prolonged exposure of the OPTO-TOUCH to hot water and moist
high-temperature environments above 150 F (66 C) should be
avoided.
halogenated hydrocarbons, and strong alkalis should be avoided.
Clean periodically using mild soap solution and a soft cloth. Avoid
strong alkaline materials.
®
DC-only Quick-disconnect (QD) models require model MBCC-
base.
Aromatic hydrocarbons (such as xylene and toluene),
OTB Series Momentary Action
Optical Touch Button (QD model shown)
E71083
LR41887-24
(models with polysulfone housing)
(models with Lexan
®
housing)
:
: