AH5A Bogen Communications, Inc., AH5A Datasheet - Page 2

• Manufacturer Part Number: AH5A
• Description: Speaker; 275Hz to 14kHz; 24VDC; 5W; 1000 Ohms; Textured Mocha Enamel; 116dB; 4lbs.
• Manufacturer: Bogen Communications, Inc.

Specifications of AH5A

• Connection Type: Quick
• Dimensions: 9 in. Dia. x 9-1⁄4 in. D
• Dispersion: 110
• Finish: Textured Mocha Enamel
• Frequency Response: 275 Hz to 14 kHz

Specifications**
Specifications
Architect and
** Architect and Engineer Specifications are available online in a
Microsoft Word
Technical
Engineer
*1 CU = 50 mA
SPL @ 4' on axis with rated input @ 1 kHz:
®
document to assist you with preparing your bids.
The loudspeaker shall be a Bogen Model _____ ampli-
fied horn-type loudspeaker, or approved equivalent,
and shall incorporate a ___-watt amplifier with vol-
ume control. (Specify AH5A/5-watt or AH15A/15-
watt.) Frequency response shall be from 275 Hz to
14 kHz; dispersion shall be 110°.The loudspeaker shall
operate from 24V DC source, and shall provide an
input impedance of 1000 ohms.
AH5A
Maximum power output shall be 5 watts RMS. Sound
pressure level, measured four feet on axis with 5 watt
output @ 1 kHz shall be at least 116 dB. Typical oper-
ating current shall be 6 CU (300 mA). Sensitivity shall
be 32 mV across 600 ohms.
AH15A
Maximum power output shall be 15 watts RMS.
Sound pressure level, measured four feet on axis with
15 watt output @ 1 kHz shall be at least 121 dB.
Typical operating current shall be 18 CU (900 mA).
Sensitivity shall be 58 mV across 600 ohms.
Maximum Output Power (RMS):
Sensitivity (across 600 ohms):
Typical Operating Current :
Frequency Response:
Input Impedance:
Product Weight:
Dimensions:
Dispersion:
Voltage:
Finish:
AH5A
6 CU (300 mA)*
5W
275 Hz to 14 kHz
1000 ohms
24V DC
32 mV
116 dB
110º
9" Diameter x 9-
4 lb.
Textured mocha enamel
The loudspeaker shall be of weatherproof, all-metal
construction, with driver enclosed within a water-
proof housing. A 4-conductor, color-coded cable shall
be provided for quick connection to audio and power
sources. The loudspeaker shall include a self-aligning,
field-replaceable diaphragm. A plastic cover shall be
provided for strain relief and to protect the volume
control.
An all-purpose mounting bracket shall provide precise
positioning in the vertical and horizontal planes with a
single adjustment. The bracket shall include banding
slots to permit mounting on beams and pillars. The
bracket and loudspeaker shall be finished in textured
mocha enamel. The unit shall measure 9" diameter x
9-
1
1
/
/
4
4
" deep. Product weight shall be 4 pounds.
" D
50 Spring Street, Ramsey, NJ 07446, U.S.A.
201-934-8500 FAX: [phone]
Web Site: www.bogen.com
AH15A
18 CU (900 mA)*
15W
275 Hz to 14 kHz
1000 ohms
24V DC
58 mV
121 dB
110°
9" Diameter x 9-
4 lb.
Textured mocha enamel
1
/
4
" D