AZ692/AZ693
10 AMP MINIATURE
POWER RELAY
FEATURES
• Isolation spacing greater than 8 mm
• Dielectric strength 4000 Vrms coil to contact
• Approvals/Standards include UL, VDE, IEC
• Single pole — Forms A, B, C available
• 10 Amp switching
• Life expectancy to 30 million operations
• Epoxy sealed version for automatic wave soldering
• UL, CUR file E44211; VDE 4120–4940–4002/A1
CONTACTS
COIL
Arrangement
Ratings
Material
Resistance
Power
Temperature
and cleaning
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
SPDT (1 Form C)
SPST (1 Form A and 1 Form B)
Resistive load:
Max. switched power: 300 W or 2500 VA
Max. switched current: 10 A; 64 A for 2 ms
Max. switched voltage: 150* VDC or 380 VAC
UL Rating
10 A at 24 VDC or 115 VAC
1
10 A at 250 VAC
B 300 pilot duty
* If switching voltage is greater than 30 VDC, special
precautions must be taken. Please contact the factory.
Silver cadmium oxide
< 30 milliohms initially
(at rated current, voltage drop method)
/
4
HP 120 VAC motor load
Standard coil: 337 mW
Sensitive coil: 234 mW
1.9 W at 20°C (68°F) ambient
1.4 W at 40°C (104°F) ambient
Standard: 40°C (72°F) at nominal
coil voltage
Sensitive: 26°C (47°F) at nominal
coil voltage
Max. 110°C (230°F)
GENERAL DATA
NOTES
Life Expectancy
Operate Time (typical)
Release Time (typical)
Dielectric Strength
(at sea level for 1 min.) 1000 Vrms between open contacts
Insulation
Resistance
Dropout
Ambient Temperature
Vibration
Shock
Enclosure
Terminals
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
Max. Immersion Time
Weight
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Unsealed relays should not be dip cleaned.
4. Specifications subject to change without notice.
Mechanical
Electrical
Operating
Storage
Minimum operations
30 million operations
1 x 10
2 x 10
6 ms at nominal coil voltage
2 ms at nominal coil voltage
(with no coil suppression)
4000 Vrms coil to contact
10,000 megohms min. at 20°C, 500 VDC,
50% RH
Greater than 10% of nominal coil voltage
At nominal coil voltage
Standard: -55°C (-67°F) to 70°C (158°F)
Sensitive: -55°C (-67°F) to 80°C (176°F)
Both: -55°C (-67°F) to 110°C (230°F)
0.062" DA at 10–55 Hz
20 g
P.B.T. polyester
Tinned copper alloy, P.C.
270°C (518°F)
5 seconds
80°C (176°F)
30 seconds
17 grams
5
5
at 10 A, 30 VDC or 115 VAC
at 8 A, 250 VAC
7/24/02W