CA-8-1OZ 3M, CA-8-1OZ Datasheet - Page 8

• Manufacturer Part Number: CA-8-1OZ
• Description: Adhesive; Cyanoacrylate; 70 to 130 cps; 1.05; Clear
• Manufacturer: 3M

Specifications of CA-8-1OZ

• Chemical Component: Ethyl Cyanoacrylate/Hydroquinone/Poly (Methyl Methacrylate)
• Color: Clear
• Dispensing Method: Bottle
• Primary Type: Adhesive
• Special Features: High Strength
• Specific Gravity: 1.05
• Time, Setting: 15 min. (Aluminum)
• Viscosity: 70 to 130 cps
• Weight: 1 Oz.

5.2 EXTINGUISHING MEDIA
Use fire extinguishers with class B extinguishing agents (e.g., dry chemical, carbon dioxide). DO NOT USE WATER
5.3 PROTECTION OF FIRE FIGHTERS
Special Fire Fighting Procedures:
(SCBA). Water may not effectively extinguish fire; however, it should be used to keep fire-exposed containers and surfaces cool and
prevent explosive rupture.
Unusual Fire and Explosion Hazards:
travel long distances along the ground or floor to an ignition source and flash back. Combustible liquid and vapor.
Accidental Release Measures: Evacuate unprotected and untrained personnel from hazard area. The spill should be cleaned up by
qualified personnel. Ventilate the area with fresh air. For large spill, or spills in confined spaces, provide mechanical ventilation to
disperse or exhaust vapors, in accordance with good industrial hygiene practice. Warning! A motor could be an ignition source and
could cause flammable gases or vapors in the spill area to burn or explode. Contain spill. For larger spills, cover drains and build
dikes to prevent entry into sewer systems or bodies of water. Working from around the edges of the spill inward, cover with
bentonite, vermiculite, or commercially available inorganic absorbent material. Mix in sufficient absorbent until it appears dry.
Collect as much of the spilled material as possible using non-sparking tools. Place in a closed container approved for transportation
by appropriate authorities. DO NOT wipe spill or residue with cleanup materials containing cotton.
7.1 HANDLING
Keep away from heat, sparks, open flame, pilot lights and other sources of ignition. Avoid contact with oxidizing agents. Keep out of
the reach of children. Avoid eye contact with vapors, mists, or spray. Avoid breathing of vapors, mists or spray. Do not eat, drink or
smoke when using this product. Wash exposed areas thoroughly with soap and water. Avoid contact with water to prevent potentially
violent reaction or fire. Contents may be under pressure, open carefully.
7.2 STORAGE
Store away from acids. Store away from heat. Store out of direct sunlight. Store away from oxidizing agents. Keep container in
well-ventilated area. Keep container tightly closed.
_________________________________________________________________________________________________
3M MATERIAL SAFETY DATA SHEET 3M(TM)Scotch-Weld(TM) Instant Adhesive CA-8
SECTION 6: ACCIDENTAL RELEASE MEASURES
SECTION 7: HANDLING AND STORAGE
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
In the event of a release of this material, the user should determine if the release qualifies as reportable according to
local, state, and federal regulations.
Note: See STABILITY AND REACTIVITY (SECTION 10) for hazardous combustion and thermal decomposition
information.
Autoignition temperature
Flash Point
Flammable Limits - LEL
Flammable Limits - UEL
Wear full protective equipment (Bunker Gear) and a self-contained breathing apparatus
Closed containers exposed to heat from fire may build pressure and explode. Vapors may
Cup]
No Data Available
Approximately 174 ºF [Test Method: Tagliabue Closed
No Data Available
No Data Available
Page
3 of 7