93603603 BEI Duncan, 93603603 Datasheet - Page 2

• Manufacturer Part Number: 93603603
• Description: SENSOR, ROTARY, ROTATION: 360 DEG ELECTRICAL, CONTINUOUS MECHANICAL
• Manufacturer: BEI Duncan
• Type: Hall Effectr

Specifications of 93603603

• Color: Black
• Connector Type: Hall Effect
• Current, Rating: 18 mA per Output
• Function: Hall Effect
• Ip Rating: IP66/67
• Output: 2
• Primary Type: Position
• Temperature Rating: –40 to 85 °C
• Voltage, Rating: 5 VDC
• Frequency Response: 1 kHz Min.
• Weight: 35 Grams Max.
• Input Voltage: 5.0 VDC ±0.25 VDC
• Input Current: 10 mA Maximum Per Output; 20 mA Max. Total
• Sensor 1 Output: 0.50 V to 4.50 V
• Sensor 2 Output: 45 V to 0.5 V
• Electromagnetic Compatibility: 100 V/Meter, 14 kHz to 1 GHz
• Vibration: 10 GHz Peak 20-2,000 Hz
• Shock: 50 GHz, Half-Sine Pulse 5 ms Duration
• Sealing: IP66/67
• Operation Temperature: –40°C to +85°C

Mechanical Specifi cations
Mechanical travel
Frequency response
Rotational torque
Weight
Electrical Specifi cations
Mechanical input range
Input voltage
Input current
Sensor
Accuracy
Resolution
Environmental Specifi cations
Electromagnetic compatibility
Vibration
Shock
Side load
Operating temperature range
Storage temperature range
© Copyright 2007 BEI Duncan Electronics. Specifi cations subject to change without notice.
170 Technology Drive West
Irvine, CA 92618-2401
[phone] Fax: [phone]
email: [e-mail]
www.beiduncan.com
Dual Output Hall Effect Sensor
360° Non-Contacting Rotary
0° to +360° with no stops, allowing for infi nite rotations
1,000Hz minimum
0.025 – 0.110 N-m
35 grams (approx.)
0° to +360° (other, custom limited angle ranges available)
5.0 V±0.25V DC
18mA maximum per output
36mA maximum total (both channels)
0.25V – 4.75V for Analog at 5.0V input
5% – 95% duty cycle for PWM
(Different outputs and mechanical range(s) available as a custom option)
±0.6% of full scale at room temperature
±0.9% of full scale over operating temperature range
Analog (continuous)
100V/meter, 14kHz – 1GHz range
10G peak, 20 – 2,000 Hz
50Gs, half sine pulse, 5 m sec duration
1kg for 1 million cycles
-40°C to +85°C
(wider operating temperature -40° to +125 C° available)
-55°C to +105°C
Note: All dimensions are shown in millimeters
Note 1 : Shaft is positioned at 50% voltage output
ISO9001 & TS16949 Certifi ed
9360
Vs (INPUT)
GROUND
OUTPUT
CONNECTOR PIN OUTPUT
SENSOR 1
F
E
C
Series
SENSOR 2
B
A
D