ATGMK-VP6 BANNER ENGINEERING, ATGMK-VP6 Datasheet - Page 18

• Manufacturer Part Number: ATGMK-VP6
• Description: Sensor, Two Hand Control, 115Vac, Output, 6A
• Manufacturer: BANNER ENGINEERING

Specifications of ATGMK-VP6

• Function: Proximity
• Primary Type: Photoelectric
• Technology: Photoelectric
• Voltage, Supply: 115 VAC
• Coil Voltage Vac Nom: 115V
• Coil Voltage Vdc Nom: 24V
• Contact Current Max: 6A
• Contact Voltage Ac Nom: 250V
• Contact Voltage Dc Nom: 250V
• Contact Configuration: 4PST-NO
• No. Of Poles: 4
• Lead Free Status / Rohs Status: RoHS Exempt Product

OTB BUTTONS
STB BUTTONS
SG MODULES
DUO-TOUCH
DUO-TOUCH
MODULES
®
®
102
TWO-HAND CONTROL MODULES
Supply Voltage and Current
Supply Protection Circuitry
Output Configuration
Output Rating
Response Time
Output Protection
Indicators
Construction
Environmental Rating
Connections
Ambient Light Immunity
EMI/RFI Immunity
Operating Conditions
Application Notes
Certifications
Wiring Diagrams
More information online at
OTBVR81 models: 20 to 30V ac/dc
OTBA5 models: 105 to 130V ac, 50-60 Hz
OTBB5 models: 210 to 250V ac, 50-60 Hz
OTBVN6/VP6 models: 10 to 30V dc
All models require less than 25 mA (exclusive of load)
Protected against reverse polarity and transient voltages
OTBVR81, OTBA5, and OTBB5 models: SPDT electromechanical relay
OTBVN6 models: Complementary (SPDT) NPN (sinking) open-collector transistor; 1 normally open (NO) and 1
normally closed (NC)
OTBVP6 models: Complementary (SPDT) PNP (sourcing) open-collector transistors; 1 normally open (NO) and
1 normally closed (NC)
Models with electromechanical relay:
Max. switching current: 7 amps (resistive load), 1 HP maximum
Min. load: 0.05 watts (dc), 0.05 VA (ac)
Mechanical life of relay: 50,000,000 operations (minimum)
Electrical life of relay: 100,000 operations (min.) at full resistive load
Transient suppression is recommended when switching inductive loads.
Models with solid-state outputs:
150 mA maximum load (each output)
On-state saturation voltage: less than 1 volt at signal levels; less than 1.5 volts at full load
Off-state leakage current: less than 1 microamp
100 milliseconds
All models protected against false pulse on power-up.
Models with solid-state outputs have overload and short circuit protection.
Two red indicator LEDs: One lights whenever power is applied; the other lights whenever the switch is
activated making the normally-open (NO) output conduct.
Totally encapsulated, non-metallic enclosure. Black polysulfone or red polycarbonate upper housing (see
Application Notes below); fiber-reinforced thermoplastic polyester base. Electronics fully epoxy-encapsulated.
Supplied with a field cover of polypropylene (TP).
Meets NEMA standards 1, 3, 4, 4X, 12 and 13; IEC IP66
PVC-jacketed 2 m or 9 m cables, or Mini-style quick-disconnect (QD) fitting are available. QD cables are
ordered separately. See page 178.
120,000 lux (direct sunlight)
Immune to both single and mixed EMI and RFI noise sources
Temperature: -20° to +50° C
OTB Optical Touch Buttons by themselves are not stand alone devices. They must be installed to prevent
accidental actuation (example, use of field covers). The environment in which they are installed must not
adversely affect the means of actuation (example, severe contamination). See DUO-TOUCH module manuals for
information on two-hand control safety applications.
Environmental considerations for models with polysulfone upper housings:
The polysulfone upper housing will become embrittled with prolonged exposure to outdoor sunlight. Window
glass effectively filters longer wavelength ultraviolet light and provides excellent protection from sunlight.
Environmental considerations for models with polycarbonate upper housings:
Avoid prolonged exposure to hot water and moist high-temperature environments above 66° C. Avoid contact
with aromatic hydrocarbons (such as xylene and toluene), halogenated hydrocarbons and strong alkalis.
Clean periodically using mild soap solution and a soft cloth. Avoid strong alkaline materials.
For a list of certifications see page 236.
Solid State NPN/PNP: WD036 (p. 266)
bannerengineering.com
OTB Buttons
OTB Specifications
Relative humidity: 90% at 50° C (non-condensing)