SPRAY 77 3M, SPRAY 77 Datasheet - Page 4

• Manufacturer Part Number: SPRAY 77
• Description: Multipurpose Adhesive Aerosol Spray (24 fl oz.)
• Manufacturer: 3M
• Type: Multi-Purposer

Specifications of SPRAY 77

• Chemical Component: 2, 2-Dimethylbutane/2, 3-Dimethylbutane/2-Methylpentane/3-Methylpentane/Acetone/Cyclohexane/Hexane/Propane
• Dispensing Method: Aerosol
• Primary Type: Adhesive
• Temperature, Rating: +18 °C
• Time, Setting: 1 to 5 min.
• Weight: 24 fl.oz.

3M
Multipurpose Spray Adhesive
Application/Handling
Information
Storage
Shelf Life
™
Super 77
Directions for Use
1. Surface Preparation: Surfaces must be clean, dry and free from dirt, dust, oil,
2. Application Temperature: For best results the temperature of the adhesive and
3. Application:
4. Bonding Range:
5. Cleanup: Excess adhesive may be removed with 3M™ Adhesive Remover Citrus
*When using solvents, extinguish all ignition sources, including pilot lights, and
Store product at 60-80°F (16-27°C) for maximum storage life. Higher temperatures
can reduce normal storage life. Lower temperatures can cause increased viscosity of
a temporary nature. Rotate stock on a “first in-first out” basis.
When stored at the recommended conditions in the original, unopened container this
product has a shelf life of 15 months from date of shipment.
follow the manufacturer’s precautions and directions for use.
loose paint, wax or grease, etc.
the surfaces being bonded should be at least 65°F (18°C).
Base. *
• Shake can well.
• Turn spray tip so arrow points to dot on rim. (Note: Always
• Hold can 6-8 inches from surface to be sprayed.
• Make bond while adhesive is aggressively tacky.
• After use, invert can, depress spray tip until spray is free of
• Clean spray tip with turpentine. *
• 1 surface - 10 seconds to 15 minutes
• 2 surface - 10 seconds to 30 minutes
• Extra Strong Bonds – Spray both surfaces and allow a
point spray tip away from yourself and others.)
adhesive.
minimum of 30 seconds drying time.
- 3 -