LD6A-3WQB-RYG IDEC Corporation, LD6A-3WQB-RYG Datasheet - Page 8
![no-image](/images/no-image-200.jpg)
LD6A-3WQB-RYG
Manufacturer Part Number
LD6A-3WQB-RYG
Description
LIGHT TOWER 3 TIER RED/AMBER/GREEN 24VAC/DC WALL MOUNT
Manufacturer
IDEC Corporation
Type
Steadyr
Datasheet
1.LD6A-3WQB-RYG.pdf
(8 pages)
Specifications of LD6A-3WQB-RYG
Brand/series
IDEC LD6A
Color
Red/Yellow/Green
Enclosure Rating
IP65
Ip Rating
IP65
Life
30,000 hrs
Mounting Style
Wall
Mounting Type
Wall
Primary Type
Tower
Voltage, Operating
24 VDC
Voltage, Supply
24 VAC/VDC
Weight
305 g
Operating Voltage
24 VAC/DC
Degree Of Protection
IP65
Lead Free Status / Rohs Status
RoHS Compliant part
•
•
•
Mounting
•
1. Insert two nuts in the frame, and attach
2. Mount the LD6A to the bracket using
Note: See table below for typical examples
•
Note: The mounting bracket for the hous-
When using a frame mount
type, be sure to use flexible
conduit, otherwise the waterproof
characteristic is impaired.
Refer to the “Example of
Flexible Conduit” shown
on the right.
Specifications and other descriptions in this catalog are subject to change without notice.
www.idec.com
LD6A LED SignaLight Towers
30 mm
(Note)
40 mm
Turn off the power to the LD6A series
before mounting, dismounting, wiring, and
assembling the LED unit. Make sure of
correct wiring, otherwise electrical shocks
or fire may result.
Mount LD6A on a solid surface not sub-
jected to vibrations.
Do not mount the LD6A upside-down or
horizontally.
Frame Mounting
Examples of recommended frames and
frame nuts
the bracket using two M5 screws.
Recommended tightening torque:
2.6 to 2.7 N·m
four M4 screws.
Recommended tightening torque:
1.6 to 1.7 N·m
Frame
Size
Safety Precautions
Instructions
of frames and nuts. Consult the
manufacturer of the frame for the
installation method of the frame nut.
ing is 40 mm.
➁
M4 Screw, Spring Washer, Plain Washer
SFF-302
SFF-402
Frame
➀
Spring Washer
Plain Washer
SFB-001
SFB-4B5
SFB-101
SFB-008
SFB-4A5
SFB-108
Frame
M5 Screw
Nut
Bracket
IDEC CORPORATION (USA)
Tel: +1-408-747-0550 / (800) 262-IDEC (4332)
Fax: +1-408-744-9055 / (800) 635-6246
E-mail: opencontact@idec.com
IDEC CANADA LIMITED
Tel: +1-905-890-8561, Toll Free: (888) 317-4332
Fax: +1-905-890-8562
E-mail: sales@ca.idec.com
IDEC AUSTRALIA PTY. LTD.
Tel: +61-3-9763-3244, Toll Free: 1800-68-4332
Fax: +61-3-9763-3255
E-mail: sales@au.idec.com
Conduit port
(M20×P1.6)
Conduit
Gland
Corporation
Manufac-
turer
SUS
Frame
(Note)
Frame Nut
(Note)
•
•
•
•
•
•
1. Make four tapped holes in the mounting
2. Mount the LD6A to the bracket using
Direct Mounting
•
Pole Mounting
The pole mount type can be installed in
four ways. The recommended mounting
method (pattern 4) is described below.
Recommended tightening torque:
2.6 to 2.7 N·m (M5 screw)
Do not leave the LD6A without a cap or
unassembled.
Install the supplied gasket, otherwise
waterproof characteristics is impaired.
Do not apply any chemicals which may
corrode the plastic material.
If the LD6A is subjected to strong vibra-
tions, the hexagon socket screw may
become loose. Take measures to prevent
loosening. (See the figure on the right.)
Conduit Port Size
Gland
Conduit
Manufacturer
Example of Flexible Conduit
Wall Mounting
Recommended tightening torque:
2.6 to 2.7 N·m
panel and mount the bracket and gasket
using four screws (M4 x 20).
Recommended tightening torque:
1.6 to 1.7 N·m
four screws (M4 x 8).
Recommended tightening torque:
1.6 to 1.7 N·m
Panel
M5 Screw
O-ring
Pole Stand
Gasket
Panel
Plain Washer
Spring Washer
Nut
➁
M4 Screw (I=8), Spring Washer, Plain Washer
➀
IDEC ELECTRONICS LIMITED
Tel: +44-1256-321000, Fax: +44-1256-327755
E-mail: sales@uk.idec.com
IDEC ELEKTROTECHNIK GmbH
Tel: +49-40-25 30 54 - 0, Fax: +49-40-25 30 54 - 24
E-mail: service@idec.de
IDEC (SHANGHAI) CORPORATION
Tel: +86-21-5353-1000, Fax: +86-21-5353-1263
E-mail: idec@cn.idec.com
IDEC (BEIJING) CORPORATION
Tel: +86-10-6581-6131, Fax: +86-10-6581-5119
IDEC (SHENZHEN) CORPORATION
Tel: +86-755-8356-2977, Fax: +86-755-8356-2944
4-M5
Mounting
Hole
M4 Screw (I=20)
Spring Washer
Plain Washer
M5 Screw
Spring Washer
Plain Washer
O-ring
Base
Gasket
Nut
M20
AL16/M20/A/BL
PAFS16BL
Adaptaflex
Bracket
Gasket
Pole Stand
7-31, Nishi-Miyahara 1-Chome, Yodogawa-ku, Osaka 532-8550, Japan
Tel: +81-6-6398-2571, Fax: +81-6-6392-9731
E-mail: marketing@idec.co.jp
4-M5 Mounting Hole
(recommended)
Cat. No. EP1252-0 MARCH 2009 5.4T PRINTED IN JAPAN
4-M4 Mounting Hole
3-M4 Mounting Hole
Panel
Nut
Wiring
•
•
•
•
•
•
•
•
Highest Temperature
Limitations
The highest temperature is limited to 50ºC
when all tiers are lit continuously in the
following combinations:
1. Two or more tiers including blue and
2. Four or five tiers (example: Red-Yellow-
•
LED Uni t – Red
LED Uni t –Yellow
LED Uni t –Blue
LED Uni t –Green
LED Uni t –Pure White
Power Line
Do not loosen the screw for which the
tightening torque is not specified.
Connect the wiring as shown below.
Incorrect wiring may damage the internal
circuit.
Be sure to insulate unused wires.
Connect an appropriate fuse to the power
line as shown in the figure on page 7.
Use a fuse with 1A rated current
Use a UL listed external fuse holder.
Use a class 2 power supply only.
When using the same color for two or
more tiers, only one wire is used to light
all tiers of the same color. Determine the
contact capacity in consideration of the
LED rated current.
Wire Color
green (example: Red-Green-Blue,
Green-Green-Red)
Green-Pure White, Red-Yellow-Blue-
Green-Pure White)
LED Color
IDEC IZUMI (H.K.) CO., LTD.
Tel: +852-2803-8989, Fax: +852-2565-0171
E-mail: info@hk.idec.com
IDEC TAIWAN CORPORATION
Tel: +886-2-2698-3929, Fax: +886-2-2698-3931
E-mail: service@tw.idec.com
IDEC IZUMI ASIA PTE. LTD.
Tel: +65-6746-1155, Fax: +65-6844-5995
E-mail: info@sg.idec.com
(recommended tightening torque:
1.1 to1.2 N ・ m)
2-M4 holes for hexagon socket
set screws
Red
Orange
Blue
Green
White
Yellow
Wire Color
(090318)