STBVP6-RB1E02 BANNER ENGINEERING, STBVP6-RB1E02 Datasheet - Page 10

• Manufacturer Part Number: STBVP6-RB1E02
• Description: Safety; Duo-Touch; Run Bar System; LED Indicator; 2 NC Safety Contacts
• Manufacturer: BANNER ENGINEERING

Specifications of STBVP6-RB1E02

• Function: Proximity
• Primary Type: Photoelectric
• Sensing Mode: Through-Beam
• Technology: Photoelectric

DUO-TOUCH
10
Supply Voltage and Current
Supply Protection Circuitry
Output Configuration
Output Rating
Output Protection Circuitry
Output Response Time
STB Indicators
Construction
Environmental Rating
Connections
Ambient Light Immunity
EMI/RFI Immunity
Operating Conditions
Application Notes
Certifications
P/N 131634 rev. B
®
Run Bar with STB Buttons
10 to 30V dc
Power consumption: approx. 1.8W @ 24V dc (with no output load), for each STB
Protected against transient voltages and reverse polarity
Complementary PNP (sourcing) open-collector transistors
Maximum load: 150 mA
On-state saturation voltage: ≤ 15V @ full load
Off-state leakage current: < 1 µA
Protected against false pulse on power-up; overload and short-circuit protection.
20 milliseconds ON/OFF
2 green LED indicators:
Power: ON – power applied
Output/fault: O N – button is activated
STB Buttons: T otally encapsulated, non-metallic enclosure; black polyetherimide yoke housing (see Application
E-Stop Button: Polyamide red button with metal base.
Run Bar Housing: 13 ga (0.090") cold rolled steel with powder coat paint; polypropylene copolymer STB mount.
STBVP6-RB1 Run Bar Models meet IP20
STBVP6-RB2 Run Bar Models meet IP65
Models STBVP6-RB1/-RB2 and -RB1E02/-RB2E02: T erminal strip connections inside run bar housing (STBs
Models STBVP6-RB1Q8/-RB2Q8: 8-pin Mini-style quick-disconnect fitting
Up to 100,000 lux
Immune to EMI and RFI noise sources, per IEC 947-5-2.
Temperature: 0 º to +50 º C (+32 º to +122 º F)
Maximum relative humidity: 90% @ +50 º C (non-condensing)
The STB’s polyetherimide upper housing will become brittle with prolonged exposure to outdoor sunlight.
Window glass effectively filters longer wavelength ultraviolet light and provides excellent protection from sunlight.
Avoid contact with strong alkalis, hydrocarbons and fuels. Clean periodically using mild soap solution and a soft
cloth. (Polycarbonate STB models are also available for use with the Run Bar; contact Factory for assistance.)
STB Buttons:
OFF – button is deactivated
Flashing – internal fault or blocked button on power-up detected
Note below); fiber-reinforced polyester base; electronics fully epoxy-encapsulated.
Specifications
US
STBVP6-RB2...Run Bars:
are pre-wired). E-stop button and EZ-LIGHT indicator (if
used) are wired separately.
Banner Engineering Corp. • Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: [phone]