12681, 444-2 Simpson, 12681, 444-2 Datasheet

no-image

12681, 444-2

Manufacturer Part Number
12681, 444-2
Description
Ohmmeter; 1 Microohm to 20 Ohms; Ni-Cad Battery and Test Leads
Manufacturer
Simpson
Type
Ohmr
Datasheet
1.12681_444-2.pdf (1 pages)

Specifications of 12681, 444-2

Includes
Ni-Cad Battery and Test Leads
Resistance Range
1 Microohm to 20 Ohms
Simpson’s high precision Model 444-2 has been redesigned for added ESD
immunity and longer battery life. The model 444-2 Micro-Ohmmeter measures
resistance from 50 micro-ohm to 20 ohms. It measures using an extremely small
test voltage (100 microvolt maximum) and a four wire measurement technique.
The resistance reading is indicated on a 4- 1/2 digit LCD display using one of two
measuring modes: An automatic AC measurement mode or a manual DC
measurement mode. By limiting the test voltage of the Model 444-2 to only 100
micro volts the instrument will not "punch through" contamination or corrosion. An
audible tone can be used to indicate resistance values below any selected reading.
The Model 444-2 has a universal power input range of 85Vac to 250Vac and
incorporates a self-contained rechargeable Ni-Cad battery for field use.
Specifications
Accuracy:
Alarm: Resistance below set point activates audible beeper and display annunciator.
Resistance above set point activates display annunciator.
Set point Adjustment: Front Panel Knob
Accuracy:
Maximum Test Voltage: 100 V peak
Measurement Techniques: (AC) Pulse of 50 Hertz Square Wave and DC Switchable
Polarity
Display: 19,999 count LCD with 0.5" digits and "AC," "DC," "B" and "
Conversion rate: reading 2 per second
Test Leads: BNC to dual Kelvin clip (2 leads) RG-58
Operating Voltage: 85VAC to 250VAC , 10VA maximum
Operating Temperature Range: 0° to 50°C
Storage Temperature Range: -40° to +60°C
Ordering Information
• 20,000 Count 4
• 2 Measurement Methods: AC Pulse and DC Polarity Switching
• Punch-Through Prevention by 100 V Max. Test Voltage
• User-Adjustable, Low-Resistance Alarm
• AC Test Mode Cancels Offset Voltages and Thermocouple Effects
• Includes Ni-Cad Battery for Field Use and Test Leads
• Extended Battery Life, 10 Hours Typical
Measures from 50 Micro-Ohm to 20 Ohms
MICRO-OHMMETER
444-2 Micro-Ohmmeter, 85V/250V
(0.05% of input
200m
Range
20m
20
2
(0.05% of input
(2% of input +150 counts)
15 counts) AC mode
1
/
2
-Digit LCD
600 counts) DC mode
Resolution
100
10
1
1m
Catalog No.
12681
Maximum Test Current
ACCESSORIES
Standard Test Lead Set
Kelvin Test Probe Set
500 A
50 A
5 A
5mA
" annunciators
444-2 Low Voltage Micro-Ohmmeter
15
Specifications (Continued)
Relative Humidity: 90% maximum up to 35°C,
70% maximum up to +50°C (non-condensing)
Temperature Coefficient: 0.2%/°C (0° to 18°C and 28° to 50°C)
Extended Battery Life: Typical 10 hours
Battery Mode Rated Circuit-To-Ground Voltage: 30V (RMS)
Display Settling Time: <15 seconds
Dimensions: 2.7" x 8.4" x 9.0" (68 x 213 x 228 mm) nominal
Weight: Approximately 3 Ibs.
Catalog No.
00827
02151
ACCESSORIES
Case, Molded Plastic
Catalog No.
45029