712XBXC-120 Magnecraft/Schneider Electric, 712XBXC-120 Datasheet - Page 2
![no-image](/images/no-image-200.jpg)
712XBXC-120
Manufacturer Part Number
712XBXC-120
Description
RELAY, ALTERNATING, DPDT CROSS, 120VAC, 12 AMP
Manufacturer
Magnecraft/Schneider Electric
Datasheet
1.712XBXC-120.pdf
(5 pages)
Specifications of 712XBXC-120
Lead Free Status / Rohs Status
RoHS Compliant part
Alternating Relay – Application Data
712 Alternating Relay
In many industrial pumping applications, two identical pumps are used for the same job. A standby unit is available in case
the first pump fails. However, a completely idle pump might deteriorate and provide no safety margin. Alternating relays
prevent this by assuring that both pumps get equal run time.
The Model 712 Series Alternating Relay is designed for duplex pumping systems where it is desirable to equalize pump run
time. The solid state alternating circuit drives an internal electromechanical relay. A continuous power source and control
switch is required.
The control switch (float, pressure or other isolated contact) is connected as shown in the respective wiring diagrams. Each
time the control switch is opened the output contacts will change status. Indicator lights on the case show the internal relay
status.
Setting the top toggle switch to the “center position” alternates the load; while setting the switch to “Load 1” or “Load 2” will
lock the relay in the respected position, preventing alternation.
The alternating relay approach isn’t limited to pumping applications. The control switches could be thermostats or pressure
switches, and the loads could be fans or compressors.
Applications:
INDUSTRIAL
INDUSTRIAL
PACKING
PUMPING
INDUSTRIAL
COMPRESSORS
AUTOMATION
APPLIANCES
MACHINES
MACHINES
FANS
www.magnecraft.com
847-441-2540
7/3
M ag n e cr a f t S olu t i o n G ui de 10 5A