MAX4951AECTP+ Maxim Integrated Products, MAX4951AECTP+ Datasheet - Page 4

• Manufacturer Part Number: MAX4951AECTP+
• Description: IC REDRIVER SATA DUAL 20TQFN
• Manufacturer: Maxim Integrated Products
• Type: Redriverr

Specifications of MAX4951AECTP+

• Number Of Drivers/receivers: 1/1
• Protocol: SATA I / SATA II
• Voltage - Supply: 3 V ~ 3.6 V
• Mounting Type: Surface Mount
• Package / Case: 20-TQFN Exposed Pad
• Supply Voltage (max): 3.6 V
• Supply Voltage (min): 3 V
• Maximum Operating Temperature: + 70 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: 0 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

V. Quality Assurance Information
VI. Reliability Evaluation
Maxim Integrated Products. All rights reserved.
A. Quality Assurance Contacts:
B. Outgoing Inspection Level:
C. Observed Outgoing Defect Rate:
D. Sampling Plan:
A. Accelerated Life Test
monitors on its processes. This data is published in the Reliability Report found at http://www.maxim-ic.com/qa/reliability/monitor.
Cumulative monitor data for the G4 Process results in a FIT Rate of 0.02 @ 25C and 0.37 @ 55C (0.8 eV, 60% UCL)
B. Moisture Resistance Tests
C. E.S.D. and Latch-Up Testing
JESD22-A114. Latch-Up testing has shown that this device withstands a current of +/-250 mA, 1.5x VCCMax Overvoltage per JESD78.
=
MTTF
The results of the 150°C biased (static) life test are shown in Table 1. Using these results, the Failure Rate ( ) is calculated as follows:
The following failure rate represents data collected from Maxim"s reliability monitor program. Maxim performs quarterly life test
The industry standard 85°C/85%RH or HAST testing is monitored per device process once a quarter.
The AJ95-1 die type has been found to have all pins able to withstand a HBM transient pulse of +/-2500 V per JEDEC
1
= 22.4 x 10
= 22.4 F.I.T. (60% confidence level @ 25°C)
=
-9
(where 4340 = Temperature Acceleration factor assuming an activation energy of 0.8eV)
192 x 4340 x 48 x 2
1.83
(Chi square value for MTTF upper limit)
Ken Wendel (Director, Reliability Engineering)
Bryan Preeshl (Managing Director of QA)
0.1% for all electrical parameters guaranteed by the Datasheet.
0.1% For all Visual Defects.
< 50 ppm
Mil-Std-105D
Page 4/5
MAX4951AE