MI145 Pico, MI145 Datasheet
MI145
Manufacturer Part Number
MI145
Description
PROBE, 250 MHZ, FOR USE WITH PS5000 SERIES
Manufacturer
Pico
Datasheet
1.MI007.pdf
(1 pages)
Specifications of MI145
Lead Free Status / Rohs Status
RoHS Exempt Product
Sensors, Probes & Accessories
30
Description
60 A AC/DC - BNC
60 A AC/DC - 4 mm
Pico Technology supply a range of non-contact current clamps for
applications ranging from automotive diagnostics to energy studies. All the current
clamps can be used with our oscilloscopes and come with either BNC or 4 mm
connectors. The clamps with 4 mm plugs can also be used with multimeters.
Choosing BNC or 4mm
The 60 A AC/DC and 600 A AC/DC current clamps are available with either
BNC or 4mm connectors. The BNC versions give superior noise rejection,
ideal for use in noisy environments, and can be connected directly to any
of our oscilloscopes. The 4 mm versions are suitable for use with our EL040
Current Monitor Converter or with multimeters, or can be connected to an
oscilloscope through our TA000 or TA020 test leads.
Description
300 A AC
60 A AC/DC
• 10 mA to 60 A
• Measures both AC
• Selectable voltage
• 20 A and 60 A ranges
300 A AC
• 0.1 A to 300 A
• No batteries
• Voltage output 1 mV AC per 1 A AC
• Supplied with 4 mm connectors
current clamp
and DC current
output:
1 mV per 10 mA, 1 mV per 100 mA
current clamp
required
Pico Technology Limited
Current Clamps
Order No.
Order No.
PP264
PP218
TA011
2000 A DC / 1500 A AC
• Suitable for
• Supplied with
Description
2000 A AC/DC
600 A AC/DC
• Measures currents
• Measures both AC
• Low battery indicator
Description
600 A AC/DC - BNC
600 A AC/DC - 4 mm
measuring
currents up to
2000 A DC or
1500 A AC.
4 mm connectors
up to 600 A
(up to 400 Hz) and
DC currents
Order No.
Order No.
TA015
PP266
PP179
Pico's ergonomically designed oscilloscope probes are suitable for use with the
whole range of Pico PC Oscilloscopes.
The high-quality 60 MHz and 250 MHz passive oscilloscope probes offer
accurate measurements at a low cost and are ideal for general-purpose use, whilst
the active differential oscilloscope probe allows you to make floating voltage
measurements using a standard oscilloscope.
Whether you require a passive or an active oscilloscope probe, the Pico range
offers high-performance at an affordable price.
For more information on the oscilloscope probes Pico provides, please visit:
60 MHz Oscilloscope Probe x1/x10
• Standard x1 / x10 oscilloscope probe
• 60 MHz bandwidth
• 10 megohm / 15 pF
• 600 V max. input
• 1.2 metre (4 foot)
Description
60 MHz Oscilloscope Probe, x1 / x10
250 MHz Oscilloscope Probe, x1 / x10
250 MHz probe calibrated for PicoScope 5203 & 5204
Differential Oscilloscope Probe, x10 / x100
input
cable
www.picotech.com
Differential Oscilloscope Probe X10/X100
• Active circuitry
• x10 / x100 switchable
• ±70 V DC + peak AC (10:1)
• ±700 V DC + peak AC (100:1)
The probe permits a conventional earthed oscilloscope to measure signals
that are not referenced to earth, enabling mains voltages to be tested.
Ideal for investigation of motor speed controls, uninterruptible power
supplies, switch mode power supplies and process controllers.
Oscilloscope Probes
250 MHz Oscilloscope Probe x1/x10
• Standard x1 / x10 oscilloscope probe
• 250 MHz bandwidth
• 10 megohm / 11 pF input
• 600 V max. input
• 1.2 metre (4 foot)
• Calibrated version
cable
available for use with
PicoScope 5203 and 5204
• DC to 25 MHz bandwidth
• Accuracy ±2%
• 4 megohm / 5.5 pF inputs to ground
• 4 AA cells or mains adapter
Sensors, Probes & Accessories
+44 (0) 1480 396395
http://accessories.picotech.com
Order No.
MI007
MI103
MI145
MI053
31