MGW151212 Cosel U.S.A. Inc., MGW151212 Datasheet - Page 13

• Manufacturer Part Number: MGW151212
• Description: DC/DC CONV; INDUSTRIAL STAND FOOTPRINT; 15.6 W; 9-18 VDC; 0.65 AMP; DIA.1X.39X1
• Manufacturer: Cosel U.S.A. Inc.
• Type: Commercialr

Specifications of MGW151212

• Brand/series: MG Series
• Configuration: Enclosed
• Mounting Type: Thru-Hole
• Number Of Outputs: Dual
• Operation: Switching
• Output: ±12V @1.3A
• Power, Output: 15.6 W
• Primary Type: DC-DC
• Voltage, Input: 9-18 VDC
• Voltage, Output: ±12 or24 VDC
• Lead Free Status / Rohs Status: RoHS Compliant part

GENERAL SPECIFICATIONS
ISOLATION
ENVIRONMENT
SAFETY
OTHERS
*1
*2
*3
*4
*5
*
External view
MGFW15xx05/MGFW15xx12/MGFW15xx15 is available as single output, +10V/+24V/+30V
Rated input 12V, 24V or 48V DC lo=100%
Ripple and Ripple Noise is measured by using test board with in 50mm from output pin terminals.
Drift is the DC output accuracy for eight hours period after a half-hour warm-up at 25C.
Rated input voltage (DC24V, DC48V), rated output wattage, ambient temperature at 25C.
Parallel operation with other model is not possible.
INPUT-OUTPUT
INPUT-CASE
OUTPUT-CASE
OPERATING TEMP.,HUMID.AND ALTITUDE -40 to +85C, 20 to 95%RH (Non condensing) (Required Derating), 3,000m (10,000feet) max
STORAGE TEMP.,HUMID.AND ALTITUDE -40 to +100C, 20 to 95%RH (Non condensing), 9,000m (30,000feet) max
VIBRATION
IMPACT
AGENCY APPROVALS
CASE SIZE/WEIGHT
COOLING METHOD
+
-
Vin
Vin
RC
f
1
±0.1
20.32
25.4
Name Plate
DC1,500V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (20±15C)
DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (20±15C)
DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (20±15C)
10 - 55Hz, 98.0m/s
490.3m/s
UL60950-1, C-UL, EN60950-1
25.4X9.9X25.4mm (WXHXD) / 20g max
Convection/Forced air
+Vout
TRM
-Vout
2
(50G), 11ms, once each along X, Y and Z axis
2
(10G), 3minutes period, 60minutes each along X, Y and Z axis
¶ Tolerance ±0.5
¶ Dimensions in mm
¶ Pin terminal material : Copper
¶ Plating treatment of terminal : Lead free plating
¶ Case material : Brass
¶ Plating treatment of case : Nickel plating
¶ Please keep enough creepage distance with the
¶ Mass 20g or less
pattern on PCB and other components.
¶
Recommended Pad and Hole dia.
MGFS15
(TOP VIEW)
¶
¶
Unit : 0.1inch
Dimension : mm
6-f1.5
12