CA-40 3M, CA-40 Datasheet - Page 7

• Manufacturer Part Number: CA-40
• Description: PRONTO INSTANT ADHESIVE 1 OZ BOTTLE STKCHK: 62381403302
• Manufacturer: 3M

Specifications of CA-40

• Chemical Component: Ethyl Cyanoacrylate/Hydroquinone/Poly (Methyl Methacrylate)
• Dispensing Method: Bottle
• Primary Type: Adhesive
• Special Features: High Strength
• Weight: 1 Oz.

8.2 PERSONAL PROTECTIVE EQUIPMENT (PPE)
8.2.1 Eye/Face Protection
Avoid eye contact with vapors, mists, or spray.
The following eye protection(s) are recommended: Safety Glasses with side shields, Indirect Vented Goggles.
8.2.2 Skin Protection
Avoid skin contact.
Select and use gloves and/or protective clothing to prevent skin contact based on the results of an exposure assessment. Consult with
your glove and/or protective clothing manufacturer for selection of appropriate compatible materials.
Gloves made from the following material(s) are recommended: Butyl Rubber, Polyvinyl Alcohol (PVA), Polyethylene/Ethylene
Vinyl Alcohol. The following protective clothing material(s) are recommended: Apron - Polyethylene ethylene vinyl alcohol. DO
NOT wear cotton gloves.
8.2.3 Respiratory Protection
Avoid breathing of vapors, mists or spray.
Select one of the following NIOSH approved respirators based on airborne concentration of contaminants and in accordance with
OSHA regulations: Half facepiece air-purifying respirator with organic vapor cartridges and N95 particulate prefilters. Consult the
current 3M Respiratory Selection Guide for additional information or call 1-800-243-4630 for 3M technical assistance.
8.2.4 Prevention of Swallowing
Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water.
8.3 EXPOSURE GUIDELINES
SOURCE OF EXPOSURE LIMIT DATA:
_________________________________________________________________________________________________
3M MATERIAL SAFETY DATA SHEET 3M(TM) Scotch-Weld(TM) Instant Adhesive CA-40
ETHYL CYANOACRYLATE
HYDROQUINONE
HYDROQUINONE
HYDROQUINONE
Ingredient
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
ACGIH: American Conference of Governmental Industrial Hygienists
CMRG: Chemical Manufacturer Recommended Guideline
OSHA: Occupational Safety and Health Administration
AIHA: American Industrial Hygiene Association Workplace Environmental Exposure Level (WEEL)
Specific Physical Form:
Odor, Color, Grade:
General Physical Form:
Autoignition temperature
Flash Point
Flammable Limits - LEL
Flammable Limits - UEL
Boiling point
Density
Vapor Density
Vapor Pressure
ACGIH
ACGIH
CMRG
OSHA
Authority
TWA
TWA
STEL
TWA
Type
Thin Liquid
clear, colorless, sharp irritating odor
Liquid
175 ºF [Test Method: Closed Cup]
131 ºF [Details: @ 2mm Hg]
1.05 g/ml
4.5 [Ref Std: AIR=1]
<=1 Pa
No Data Available
No Data Available
No Data Available
0.2 ppm
2 mg/m3
4 mg/m3
2 mg/m3
Limit
Table A3
Table Z-1
Additional Information
Page
4 of 7