SF4SKK4GXXGXXXX Eaton / Switches, SF4SKK4GXXGXXXX Datasheet

no-image

SF4SKK4GXXGXXXX

Manufacturer Part Number
SF4SKK4GXXGXXXX
Description
Switch, Sealed Vehicle Rocker, DPDT, (On)-Off-(On), 14V Green LED Top/Bottom
Manufacturer
Eaton / Switches
Type
Rockerr
Datasheet

Specifications of SF4SKK4GXXGXXXX

Contact Form
DPDT
Current, Rating
12 A
Dielectric Strength
1500 VAC
Ip Rating
IP68
Mounting Hole Size
1.400" × 0.810"
Mounting Type
Snap-In
Number Of Poles
2
Number Of Positions
3
Operation
(On)-Off-(On)
Special Features
Illuminated
Termination
Spade
Voltage, Rating
24 VDC
Lead Free Status / Rohs Status
RoHS Compliant part
Description
The Sealed Vehicle Rocker
(SVR) switch from Eaton’s
electrical business now offers
an above panel actuator style
in addition to the below panel
and paddle actuators. Designed
to meet the severe environmen-
tal requirements of the con-
struction and agricultural vehicle
markets, the SVR is sealed
at the front and back of the
switch, and meets the rigorous
sealing requirements of IP68.
The small switch footprint
minimizes the space taken on
switch panels. SVR switches
are assembled into panels by
pressing the switch through the
top of the panel, and are held in
place by retention tabs molded
Below (left) and above (right) panel rocker switch styles
CONTENTS
TABLE OF
Description
Specifications
Additional Options
How to Order
Circuit Descriptions
Dimensions
Icons
EATON CORPORATION
8 – 10
Page
2 – 3
4 – 5
6 – 7
11
2
3
into the body of the switch;
mounting hardware or special
tools are not necessary.
The SVR is offered in single-
and double-pole switch
circuits, with 2- and 3-position
momentary and maintained
circuits available. Switch and
nated with 2.8 mm (0.11 inch)
tin-plated copper alloy spade
terminals. The SVR connector
can be loaded with the appro-
priate terminals and/or wire
seals to accomplish sealing
at the back end of the switch.
Specifications
Electrical Life
Mechanical Life
Dielectric Strength
1500 volts rms minimum.
illumination circuits are termi-
Standard plating:
50,000 operations at 12
amperes at either 12 or 24
Vdc. Life cycle testing con-
ducted using both inductive
and resistive loads.
Gold plating:
250,000 (maintained circuits) /
50,000 (momentary circuits)
operations at 10 mA at either
12 or 24 Vdc.
Maintained circuits:
250,000 operations minimum.
Momentary circuits:
50,000 operations minimum.
Above panel rocker switch with two white
snap-in lenses and amber LED
Operate Force
4.4 – 13.2 N (1 – 3 lbs.) depend-
ing on circuit configuration and
actuator style.
Operating Temperature Range
-40°C to +85°C
Storage Temperature Range
-40°C to +85°C
Circuits
1- or 2-pole, 2- or 3-position,
with momentary and
maintained capabilities.
Standard Circuit Options
(* = Momentary. See circuit
schematics on Page 6.)
Contact Material
Silver-plated copper alloy with
silver alloy contact surface.
Contacts are available for low
level electrical loads.
ON – NONE – ON
ON – OFF – ON
ON* – OFF – ON*
ON* – OFF – ON
ON – ON – ON
ON* – NONE – ON
ON* – ON – ON*
ON* – ON – ON
Movable:
Copper alloy with silver
alloy contact surface.
Stationary:
Gold-plated:
Below panel rocker switch with daylight
white icon and red LED
Terminal Type
Plastic Component
UL Ratings
Mounting Means
Snap-in mounting using four
flexible plastic retainers integral
with switch frame.
Mounting Hole
Standard panel cutout of 36.8 x
21.1 mm (1.45 x 0.83 inches).
(See panel opening drawing
on Page 8.)
tin-plated copper alloy
spade terminal.
Power Timer Terminals —
Catalog Numbers 927766-3
(14 – 16 gauge) and
927770-3 (18 – 20 gauge).
(See also Sealing section
below for additional AMP
components to seal the
connector interface.)
UL94 V-O
UL94 H-B
Standard 2.8 mm (0.11 inch)
Mates to AMP Junior
Base material:
Frame material:
Sub-actuator material:
UL94 V-O
Actuator material:
UL94 H-B (below panel
rocker button and
paddle actuator)
UL94 V-0 (above panel
rocker button)

Related parts for SF4SKK4GXXGXXXX

SF4SKK4GXXGXXXX Summary of contents

Page 1

... The small switch footprint Momentary circuits: • minimizes the space taken on 50,000 operations minimum. switch panels. SVR switches are assembled into panels by Dielectric Strength pressing the switch through the 1500 volts rms minimum. top of the panel, and are held in ...

Page 2

Below panel rocker switch with daylight white icons (left) and above panel rocker switch with two snap-in lenses (right) Panel Thickness Actuator Styles 1.0 to 4.0 mm (0.04 to 0.16 Above panel rocker button • inches). Best results obtained offers ...

Page 3

S Switch Series 1 Digit S = SVR S = Standard – Below Panel T = Palm Guard – Top/Left B = Palm Guard – Bottom/Right F = Palm Guard – Full Switch Circuits/Illumination Circuits 1st Digit (Circuit) 2nd Digit ...

Page 4

Electrical Circuit Descriptions SWITCH CIRCUIT SCHEMATICS SINGLE-POLE CODE SCHEMATIC (Shown in Top/Left Actuated Position) TOP/LEFT ACTUATED (GOLD – ...

Page 5

Illumination Circuit Descriptions ILLUMINATION CIRCUIT SCHEMATICS SINGLE-POLE DOUBLE-POLE SCHEMATIC CODE CODE NONE ...

Page 6

Dimensions ABOVE PANEL ROCKER SWITCH WITH ACTUATOR T/L = Top/Left B/R = Bottom/Right TOP/LEFT ACTUATED CENTER 20.50±.25 (.807±.010) BOTTOM/RIGHT ACTUATED 36.00±.25 (1.418±.010) 35.60±.25 (1.400±.010) PANEL SEAL GASKET Catalog Number 32-2245 43.18±.25 (1.700±.010) 36.83±.25 (1.450±.010) 30.23±.25 (1.190±.010) 20.62±.25 17.27±.25 (.812±.010) (.680±.010) ...

Page 7

Dimensions BELOW PANEL ROCKER SWITCH WITH ACTUATOR T/L = Top/Left 25.00±.25 (0.980±.010) B/R = Bottom/Right 9.90±.13 (.390±.005) 6.90±.13 (.270±.005) TOP/LEFT ACTUATED CENTER 11.40±.25 BOTTOM/RIGHT ACTUATED (.446±.010) 44.00±.25 (1.730±.010) 35.60±.25 (1.400±.010) INDICATOR (BELOW PANEL ONLY) T/L = Top/Left B/R = Bottom/Right ...

Related keywords