ATA6623-TAPY Atmel, ATA6623-TAPY Datasheet - Page 11

• Manufacturer Part Number: ATA6623-TAPY
• Description: TXRX LIN BUS W/VREG 3.3V SO-8
• Manufacturer: Atmel
• Type: Transceiverr

Specifications of ATA6623-TAPY

• Number Of Drivers/receivers: 1/1
• Protocol: LIN
• Voltage - Supply: 5 V ~ 27 V
• Mounting Type: Surface Mount
• Package / Case: SO-8
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

6. Voltage Regulator
4957I–AUTO–03/11
Figure 6-1.
The voltage regulator needs an external capacitor for compensation and to smooth the distur-
bances from the microcontroller. It is recommended to use an electrolythic capacitor with
C > 1.8µF and a ceramic capacitor with C = 100nF. The values of these capacitors can be var-
ied by the customer, depending on the application.
With this special SO8 package (fused lead frame to pin 3) an R
Therefore, it is recommended to connect pin 3 with a wide GND plate on the printed board to
get a good heat sink.
The main power dissipation of the IC is created from the V
needed for the application.
Figure 6-2
5.5V/3.8V
5V/3.3V
shows the safe operating area of the Atmel
5V/3.3V
NRES
VCC
V
12V
VS
thun
V
CC
Voltage Regulator: Ramp Up and Undervoltage
t
VCC
t
Reset
Atmel ATA6623/ATA6625
®
ATA6625.
CC
thja
output current I
of 80K/W is achieved.
t
res_f
VCC
, which is
11