173D105X9050VE3 Sprague / Vishay, 173D105X9050VE3 Datasheet - Page 6

• Manufacturer Part Number: 173D105X9050VE3
• Description: CAPACITOR, TANTALUM; 1 uF; 50 WVDC @ DEGC; 65 V; + 10%; V; AXIAL LEADED
• Manufacturer: Sprague / Vishay

Specifications of 173D105X9050VE3

• Capacitance: 1 μF
• Material, Element: Tantalum
• Termination: Axial
• Tolerance: ±10 %
• Voltage, Rating: 50 VDC
• Lead Free Status / Rohs Status: RoHS Compliant part

STANDARD REEL PACKAGING INFORMATION
1. Component Leads:
a. Component leads shall not be bent beyond 0.047"
b. The 'C' dimension shall be governed by the overall length
2. Orientation:
a. All polarized components must be oriented to one
3. Reeling:
a. Components on any reel shall not represent more than
b. Component leads shall be positioned between pairs of
c. The disposable reels have hubs with corrugated fiber
d. A minimum of 12" [304.8 mm] leader of tape sh all be
e. 50 to 60 lb. Kraft paper must be wound between layers of
Document Number: 40019
Revision: 24-May-06
I.D. REEL HUB
TAPE AND REEL PACKAGING in inches [millimeters]
STANDARD REEL
CODE
[28.6 to 78.0]
CASE
1.126 to 3.07
W, X
DIA. THRU HOLE
[1.19 mm] maximum from their nominal position when
measured from the leading edge of the component lead
at the inside tape edge and at the lead egress from the
component.
of the reel packaged component. The distance between
flanges shall be 0.125" to 0.250" [3.18 mm to 6.35 mm]
greater than the overall component length.
direction. The cathode lead tape shall be a color and the
anode lead tape shall be white.
two date codes when date code identification is required.
0.250" [6.35 mm] tape.
board flanges and core.
provided before the first and after the last component on
the reel.
components as far as necessary for component
protection. Width of paper to be 0.062" to 0.250"
[1.57 mm to 6.35 mm] less than the 'C' dimension of the
reel.
U
V
Y
13 [330.2] DIA.
[15.88
0.625
±
±
0.062
1.57]
LABEL (4.a)
UNITS PER
REEL
4500
4000
2500
500
COMPONENT
0.200 ± 0.015
0.400 ± 0.015
[10.16 ± 3.81
[5.08 ± 3.81]
SPACING
Solid-Electrolyte TANTALEX
A
"A"
"A"
For technical questions, contact: [e-mail]
Axial-Leaded, Molded-Case
2.062 ± 0.062
[52.37 ± 1.57]
SPACING
TAPE
[19.05]
B
0.750
SECTION "A" - "A"
CASE CODE
(1.b)
C
W, X, Y
0.750 [19.05]
U, V
f. Row components must be centered between tapes
g. Staples shall not be used for splicing. Not more than
h. Quantity per reel shall be controlled so that tape
i.
j.
4. Marking:
a. Minimum reel and carton marking shall consist of the
± 0.047" [1.19 mm]. In addition, individual components
may deviate from center of component row ± 0.031"
[0.79].
4 layers of tape shall be used in any splice area and no
tape shall be offset from another by more than 0.031"
[0.79 mm] non-cumulative. Tape splices shall overlap at
least 6" [152.4 mm] for butt joints and at least 3"
[76.2 mm] for lap joints and shall not be weaker than
unspliced tape. Universal splicing clips may also be used.
components and cover shall not extend beyond the
smallest dimension of the flange (either across flats or
diameter). Once the quantity per reel for each part
number has been established, future orders for that part
number shall be packaged in that quantity. When order
release quantity is less than the established quantity, a
standard commercial pack is to be used.
quantity may be missing without consecutive missing
components.
Adequate protection must be provided to prevent
physical damage to both reel and components during
shipment and storage.
following: Customer Part Number, Purchase Order No.,
Quantity, Package Date, Manufacturer's name, Electrical
Value, Date Code, Vishay Sprague Part Number and
Country of Origin.
A maximum of 0.25 % of the components per reel
®
1.374 to 3.626
[34.9 to 92.1]
Capacitors,
AMMOPACK
UNITS PER
1000
(1.a)
500
COMPONENT OVERALL
LENGTH (1.b)
B
(BOTH SIDES) (3.f)
Vishay Sprague
0.031 [0.79] (3.f)
A
SPACING
0.125 [3.18] MAX.
0.250 [6.35] (3.b)
TAPE
OFF CENTER (1.a)
0.047 [1.19] MAX.
www.vishay.com
SPACING (4.b)
COMPONENT
173D
92