SPV14-156L 3M, SPV14-156L Datasheet - Page 3

• Manufacturer Part Number: SPV14-156L
• Description: Plug; 16 to 14 AWG; Male; Snap; Vinyl; Brass; Tin; 0.85 in.; 0.170 in. (Max.)
• Manufacturer: 3M

Specifications of SPV14-156L

• Angle: Straight
• Brand/series: Highland™, Scotchlok™
• Contact Plating: Tin
• Diameter, Insulation: 0.17 "
• Gender: Male
• Insulation Type: Vinyl
• Length: 0.85 in.
• Length, Overall: 0.85 "
• Material, Contact: Brass
• Material, Insulation: Vinyl
• Material, Terminal: Brass
• Mounting Type: Snap
• Package Quantity: 50⁄Bag, 10 Bags⁄Case
• Primary Type: Snap Plug
• Size, Stud: 0.156 "
• Special Features: Butted Seam, One Barrel
• Standards: UL Listed, CSA Certified
• Temperature, Operating, Maximum: 105 °C
• Termination: Wire
• Voltage, Rating: 600 V (Building Wire), 1000 V (Signs or Fixtures)
• Wire Size: 16-14 AWG

3M is a trademark of 3M.
Engineering Specification
Crimp-Type Snap Plug Connectors shall, electrically
and mechanically, connect permanently to a pre-
stripped end of a stranded copper wire; and have a
round tongue portion for mating to a Snap Receptacle
in a separable, reusable manner.
The connector line shall offer tongue variations
(0.156˝ and 0.180˝ diameter) and barrel variations in
wire (AWG) size (22-18, 16-14, 12-10) and construc-
tion (vinyl insulated, nylon insulated with insulation
grip). The separable connectors shall have regulatory
agency coverage (UL Listed, CSA Certification).
Electrical Products Division
6801 River Place Blvd.
Austin, TX 78726-9000
http://www.3M.com/elpd
IMPORTANT NOTICE
Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability
associated with such use.
Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture as of the date of
purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above,
your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except
where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect,
special, incidental or consequential regardless of the legal theory asserted.
The vinyl insulated 0.156˝ Male Snap Plug shall be
tin-plated 0.030˝ thick copper, with a tongue tapered
from 0.156˝ diameter and a butted seam barrel covered
by a molded vinyl funnel entry sleeve, color coded and
sized for a specified (AWG) wire range (22-18,
16-14).
Insulated separable connectors shall be UL Listed and
CSA Certified for 600 V building wire: 1000 V signs
or lighting fixtures (luminaires) and temperature rated
221˚F (105˚C) maximum.
The separable connector formed by the paired Male
Snap Plug and Female Snap Receptacle may require a
suitable strain relief to prevent accidental separation.
© 3M 2002 78-8126-0632-1-A
Litho in USA.