U2701A Agilent Technologies Test Equipment, U2701A Datasheet - Page 9
![no-image](/images/no-image-200.jpg)
U2701A
Manufacturer Part Number
U2701A
Description
USB MODULAR SCOPE, 2 CHANNELS, 100 MHZ, 500 MSA/S/CH
Manufacturer
Agilent Technologies Test Equipment
Datasheet
1.U2702A.pdf
(11 pages)
Performance Characteristics (continued)
Vertical system: oscilloscope channels (continued)
Single-cursor accuracy
Dual-cursor accuracy
Horizontal
Range
Time base accuracy
Delay range
Modes
XY
Reference position
Trigger system
Sources
Modes
Holdoff time
Selections
AutoScale
Oscilloscope channel triggering
Range (internal)
Coupling
External (EXT) triggering
Input impedance
Maximum input
Range
EXT trigger pulse width
Edge
Pulse width
TV
±{DC vertical gain accuracy + DC vertical offset accuracy + 0.2% full scale (~1/2 LSB)}
Example: for 50 mV signal, scope set to 10 mV/div (80 mV full scale), 5 mV offset,
accuracy = ±{4.0% (80 mV) + 0.1(10 mV) + 2.0 mV + 0.5% (5 mV) + 0.2% (80 mV)}
±{DC vertical gain accuracy + 0.4% full scale (~1 LSB)}
Example: for 50 mV signal, scope set to 10 mV/div (80 mV full scale), 5 mV offset,
accuracy = ±{4.0% (80 mV) + 0.4% (80 mV)} = ±3.52 mV
1 ns/div to 50 s/div
20 ppm
Pre-trigger: –100 %
Post-trigger: +100 %
Main, roll, XY
Yes
Center
Ch 1, Ch 2, Ext (not applicable for TV trigger)
Normal, single, auto trigger
60 ns
Edge, pulse width, TV
Triggers on a rising or falling edge, alternating, or either edge of any source
Triggers on a pulse width greater than, equal to, or less than a specifi ed time limit, with
time limits ranging from 16 ns to 10 s.
Minimum lower limit: 8 ns
Minimum upper limit: 16 ns
Maximum pulse width setting: 10 s
Triggers on one of three standard television waveforms: NTSC, PAL, SECAM
TV trigger sensitivity: 0.6 division of sync signal. Modes supported include Field 1, Field
2, all fi elds, or any line within a fi eld.
Single-button automatic setup of all channels
±4 div from center screen
AC (< 15 Hz)
LF reject (~ 35 kHz)
HF reject (~ 35 kHz)
1 MΩ: _ 16 pF
CAT I 30 Vrms, 42 Vpk
DC coupling: trigger level ±1.25 V and ±2.5 V
> 2.5 ns
= ±6.385 mV
9