2130C 3M, 2130C Datasheet - Page 3

• Manufacturer Part Number: 2130C
• Description: Chemicals SCOTCHCAST 21.7oz
• Manufacturer: 3M

Specifications of 2130C

• Product: Epoxy Compounds
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 00054007314028

3M™ Scotchcast™ Flame-Retardant Compound 2130
Usage Information,
continued
Shelf Life &
Storage
Availability
Important Notice
Warranty; Limited
Remedy; Limited
Liability
3M and Scotchcast are trademarks of 3M Company.
3
Electrical Markets Division
6801 River Place Blvd.
Austin, TX 78726-9000
800.245.3573
Fax [phone]
www.3M.com/electrical
Handling and Safety Precautions:
Read all Health Hazard, Precautionary and First Aid statements found in the Material
Safety Data Sheet (MSDS) and/or product label of chemicals prior to handling or use.
3M™ Scotchcast™ Flame-Retardant Compound 2130 has a 3-year shelf life from date
of manufacture when stored in the factory-sealed packaging under humidity controlled
storage (10°C/50°F to 27°C/80°F and <75% relative humidity).
Please contact your local distributor; available from 3M.com/electrical [Where to Buy] or
call 1.800.245.3573.
All statements, technical information, and recommendations related to 3M’s products are based on information believed to
be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and
determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any
statements related to the product, which are not contained in 3M’s current publications, or any contrary statements
contained on your purchase order, shall have no force or effect unless expressly agreed upon, in writing, by an authorized
officer of 3M.
This product will be free from defects in material and manufacture at the time of purchase. 3M MAKES NO OTHER
WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your
exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M
product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss
or damage arising from this 3M product, regardless of the legal theory asserted.
Typical De-Mold/Cure Time:
NOTE: Values are typical, not to be considered minimum or maximum. Always
Working around energized electrical systems may cause serious injury or death. Installation
should be performed by personnel familiar with good safety practice in handling electrical
equipment. De-energize and ground all electrical systems before installing product.
Caution
confirm that material is no longer tacky prior to de-molding.
Please recycle
© 3M 2011 All rights reserved
78-8129-9676-3 A
Temperature
70°F (21 °C)
50°F (10°C)
32°F (0°C)
3 of 3
De-Mold Time
1.5 – 2 hrs
3.5 – 4 hrs
6 – 8 hrs
Approximate Cure Time
16 – 24 hours
24 – 30 hours
36+ hours