11-91378-227 3M, 11-91378-227 Datasheet - Page 22

• Manufacturer Part Number: 11-91378-227
• Description: LCD Touch Panels 17 M1700SS 1280x1024 Ser, Black
• Manufacturer: 3M
• Series: M1700SSr
• Type: Capacitiver

Specifications of 11-91378-227

• Length: 13" (337.9mm)
• Width: 16" (405mm)
• Height: 10.6" (270.3mm)
• Interface: RS-232
• Diagonal Screen Size: 17" (433mm)
• Lead Free Status / Rohs Status: Details

3M™ MicroTouch™ Display M1700SS User Guide
Figure 12. Connecting the M1700SS Display Cables to your Computer
Testing the M1700SS Display
You should be sure all cable connections are secure -- tighten all cable screws. Shaking
and vibration may dislodge cables that are improperly connected.
Route all wiring and cabling away from heat sources and sharp metal edges to avoid
damage. Also, keep the touch sensor cable away from sources of electromagnetic and
radio frequency interference.
To avoid the risk of electric shock which could result in serious injury or death:
•
•
Note: The M1700SS Display has a power status LED located on the front of the bezel.
After connection, turn on the power switch located on the front bezel. Before you test
your display, make sure all cables are connected properly and routed through the cable
management system. Be sure to tighten all cable screws.
To test that the display is working properly:
1.
2.
3.
WARNING
Do not use a damaged power supply.
Do not use a power cord that is frayed or otherwise damaged.
Turn on your computer.
Make sure the video image is displayed. If it is not, turn on your display. Ensure the
LED is green – orange indicates power but no signal.
Make sure the video image is centered within the sensor area. Use the display
controls to adjust the image, if necessary. Perform an Auto Config first, then if you
wish you can adjust the horizontal and vertical position, contrast, and brightness to
better suit your video card and your personal preference. Refer to Chapter 3 for more
information on using the on-screen menu to adjust the video display.
22