AB0561001405PN00 AB CONNECTORS, AB0561001405PN00 Datasheet - Page 64
![no-image](/images/no-image-200.jpg)
AB0561001405PN00
Manufacturer Part Number
AB0561001405PN00
Description
PLUG, FREE, EMI, SIZE 14, 5WAY, PIN
Manufacturer
AB CONNECTORS
Series
Mil-C-26482r
Datasheet
1.AB0521001405PN00.pdf
(66 pages)
Specifications of AB0561001405PN00
Connector Type
Circular Military
Connector Body Material
Aluminium Alloy
Gender
Plug
Contact Gender
Pin
Connector Mounting
Free
Connector Shell Size
14
Rohs Compliant
No
62
Safety Information
This information is to be used in conjunction with the Product
Catalogue and Product Specification. Products may be safely
used in the applications for which they have been designed
and within the specified ratings and environments. If products
are exposed to conditions outside the performance ratings
or specified environments they may constitute a hazard. In
particular it should be noted that:
1)
Circular connectors generally use metalwork parts made of
copper, copper alloy, aluminium alloy, aluminium - bronze
or steel, which, dependant on the particular application,
may be passivated and protected with cadmium or zinc
plate - in conjunction with chromated or anodised surface
finishes. The insulating materials can be either natural or
synthetic rubber, together with plastic or glass moulded
parts. Contact materials vary with product type but are
usually made of copper, copper alloy, nickel, phosphor -
bronze, alumel chromel or steel.
2)
Hazard can occur if the product is used outside the
specified parameters or if the product is damaged, wrongly
wired or poorly assembled, or poorly integrated into larger
equipments, or contaminated with conductive fluids. Live
circuit terminations must be protected and live circuits
never broken by demating products. Hotspots may be
created when resistance is increased due to damage or
incorrect integration
loose terminations. Overheating can cause breakdown of
insulation, electric shot, burns or, ultimately, fire. In the
event of fire noxious and/or toxic fumes may be released
and, in these circumstances, any fire involving the product
should be dealt with by personnel properly equipped.
Connector products with exposed terminations or contacts
should not be used on the current supply side of a circuit
with exposed contacts on an unmated product. Before
making a circuit live, the product and wiring should be
checked to ensure that there is no damage and no electrically
conducting debris present. Circuit resistance checks should
also be conducted before making the circuit live. Always
ensure that the correct tools, (specified by AB Connectors
Ltd.) are employed for crimping and assembled and wired
by properly trained personnel.
3)
Products should not be burnt.
4)
Care must be taken to avoid damage to any part of the
products during transportation, storage or use. The products
as manufactured, are free of sharp edges. Abnormal transit
or storage conditions and abuse during installation can give
rise to damage. Products should not be used in a damaged
condition.
Improper storage (particularly of damaged products) can
give rise to additional hazards particularly corrosion. Your
attention is specifically drawn to the need of proper storage
of products containing cadmium and you are
Material Content of Products
Electric Shock, Burns and Fire
Disposal or Products
Use, Transport and Storage of Products
particularly soldering, crimping or
advised to see the Guidance Note from the Health and
Safety Executive on Cadmium - Health and Safety
Precautions.
Safety Rules
1.
2.
3.
4.
5.
6.
7.
N. B. Additional information on the products and the materials
used in them may be obtained from the Sales Department of
AB Connectors Ltd.
Shelf Life for Rubber Components
AB Connectors incorporate a number of rubber components
within their connectors.
properties during storage e.g. excessive hardening, softening,
cracking or other surface degradation. These changes may be
the result of particular factors or a combination of factors such
as light, heat, humidity, oils or solvents.
With a few simple precautions the shelf life may be considerably
lenghtened.
The storage temperature should be between +5º and +25ºC.
Direct contact with sources of heat such as boilers, radiators
and direct sunlight should be avoided. It is advisable to cover
any windows of storage rooms with a red or orange coating or
screen. The relative humidity in the storeroom should be below
70%. Very moist or very dry conditions should be avoided.
Condensation should not occur.
If the above recommendations are adhered to, then AB
Connectors would warrant a shelf life of four years for its
products.
N. B. The company reserves the right and may change or vary
specification without prior written notice.
Ensure all conductor wires are capable of withstanding
the electrical and environmental conditions of the
application.
Always use the correct assembly tools for cables, contacts
and connectors.
Make circuit resistance checks before making a circuit live.
Always protect live circuits and never demate a live
connector.
Never use a damaged connector.
Never burn discarded connectors or cable.
IF IN DOUBT, ASK.
Most rubbers change in physical
www.ttabconnectors.com