DK-PCIE-2SGX90N/UNIV Altera, DK-PCIE-2SGX90N/UNIV Datasheet - Page 17

• Manufacturer Part Number: DK-PCIE-2SGX90N/UNIV
• Manufacturer: Altera

Specifications of DK-PCIE-2SGX90N/UNIV

• Lead Free Status / Rohs Status: Supplier Unconfirmed

Altera Corporation
August 2006
f
Install Drivers and PCI Express Development Board
As stated in the
setup that allows you to download different programming files to the
on-board Stratix II GX device, you need two computers. Specify
computer #1 as the development board host computer, and computer #2
as the Quartus II programming host computer.
This section discusses the example design and the development board
host computer (computer #1). For information on using the Quartus II
programming host computer (computer #2), refer to
Downloading Programming Files to the Development
To install the demo application drivers and PCI Express development
board, use the following steps:
1
From computer #1:
1.
2.
3.
4.
Finish Installing the Drivers and the Development Board, Run
the Demo Application
In this section, you will finish installing the demo application drivers and
the PCI Express development board; then run the demo application.
1
1.
2.
Install the PCI Express Development Kit, Stratix II GX Edition
CD-ROM.
Open the Drivers directory, and double-click the install.bat file.
After the install.bat file is finished copying files and installing the
drivers, shutdown computer #1.
Insert the PCI Express development board in a x8 PCIe slot.
Start computer #1.
The Windows XP Found New Hardware Wizard appears. See
Figure
To install the drivers, you need to have administrator privileges
on your computer.
If you want to download a programming file that is different
than the kit’s pre-installed example design file, refer to
Appendix A, Downloading Programming Files to the
Development
Getting Started User Guide
2–4.
“Hardware Requirements” on page
Board.
PCI Express Development Kit, Stratix II GX Edtion
2–3, for a flexible
Appendix A,
Board.
Getting Started
2–9