DM240415 Microchip Technology, DM240415 Datasheet - Page 43

• Manufacturer Part Number: DM240415
• Description: Accessory Development Starter Kit For Android General Purpose
• Manufacturer: Microchip Technology
• Series: -r

Specifications of DM240415

• Processor To Be Evaluated: PIC24FJ256GB110-I/PT
• Processor Series: PIC24F
• Data Bus Width: 16 bit
• Interface Type: USB
• Operating Supply Voltage: 3.3 V
• Design Resources: PIC24F ADK Schematic
• Main Purpose: Reference Design, Tablet
• Embedded: Yes, MCU, 16-Bit
• Utilized Ic / Part: PIC24F
• Primary Attributes: Android OS, Development Platform for Accessories, Arduino Compatible
• Secondary Attributes: Royalty Free, No Fee Licensed Software Library
• Lead Free Status / Rohs Status: Details

Microchip's Accessory Framework for Android(tm)
6.2.2
6.2.3
Before attempting to run the demo application, insure that the correct firmware for the demo application has been loaded into
the target firmware.
The firmware for this example can be found in the "Basic Accessory Demo/Firmware" folder of this distribution. Open the
correct project file for your hardware platform for MPLAB 8. If you are using MPLAB X, open the MPLAB.X project folder and
change the configuration in the configuration drop down box. Compile and program the firmware into the device.
1. Attach the Accessory Development Starter Board to the Android device using the connector provided by the Android
device’s manufacturer. Please make sure that the accessory is attached to the Android device before launching the
application.
2. Once the demonstration application has been loaded, go to the Application folder on the Android device. Open the “Basic
Accessory Demo” application.
When the application launches, there are three general sections to the application:
Preparing the Hardware
Running the demo
38
38
6