TCG062HVLDA-G20 KYOCERA, TCG062HVLDA-G20 Datasheet - Page 15

• Manufacturer Part Number: TCG062HVLDA-G20
• Manufacturer: KYOCERA

Specifications of TCG062HVLDA-G20

• Lead Free Status / Rohs Status: Compliant

12. Precautions for use
12-1. Installation of the LCD
12-2. Static electricity
12-3. LCD operation
12-4. Storage
12-5. Usage
M628090
1) Since CMOS ICs are mounted directly onto the LCD glass, protection from static electricity is
2) Workers should use body grounding. Operator should wear ground straps.
1) The LCD shall be operated within the limits specified. Operation at values outside of these limits
1) The LCD shall be stored within the temperature and humidity limits specified.
2) Always store the LCD so that it is free from external pressure onto it.
1) DO NOT store in a high humidity environment for extended periods. Polarizer degradation bubbles,
2) The front polarizer is easily scratched or damaged. Prevent touching it with any hard material, and
3) The LCD screen may be cleaned by wiping the screen surface with a soft cloth or cotton pad using a
4) Water may cause damage or discoloration of the polarizer. Clean condensation or moisture from
5) Always keep the LCD free from condensation during testing. Condensation may permanently spot
6) Do not disassemble LCD because it will result in damage.
7) This Kyocera LCD has been specifically designed for use in general electronic devices, but not
8) Please do not use solid-base image pattern for long hours because a temporary afterimage may
9) Liquid crystal may leak when the LCD is broken. Be careful not to let the fluid go into your eyes
1) A transparent protection plate shall be added to protect the LCD and its polarizer
2) The LCD shall be installed so that there is no pressure on the LSI chips.
3) The LCD shall be installed flat, without twisting or bending.
4) Please design the housing window so that its edges are between the active area and the effective
5) A transparent protection sheet is attached to the polarizer. Please remove the protection film
and/or peeling off of the polarizer may result.
any source immediately.
or stain the polarizer.
area of the LCD screen.
slowly before use, paying attention to static electricity.
required.
may shorten life, and/or harm display images.
Store in a dark area, and protect the LCD from direct sunlight or fluorescent light.
from being pushed or rubbed.
little Ethanol.
for use in a special environment such as usage in an active gas. Hence, when the LCD is supposed
to be used in a special environment, evaluate the LCD thoroughly beforehand and do not expose
the LCD to chemicals such as an active gas.
appear. We recommend using screen saver etc. in cases where a solid-base image pattern must
be used.
and mouth. In the case the fluid touches your body; rinse it off right away with water and soap.
Spec No.
TQ3C-8EAF0-E1DEY15-00
Part No.
TCG062HVLDA-G20
Page
12