LM4667ITL National Semiconductor, LM4667ITL Datasheet - Page 10

• Manufacturer Part Number: LM4667ITL
• Manufacturer: National Semiconductor

Specifications of LM4667ITL

• Operational Class: Class-AB
• Audio Amplifier Output Configuration: 1-Channel Mono
• Output Power (typ): 1.3x1@8OhmW
• Audio Amplifier Function: Speaker
• Total Harmonic Distortion: 0.8@8Ohm@100mW%
• Single Supply Voltage (typ): 3/5V
• Dual Supply Voltage (typ): Not RequiredV
• Power Supply Requirement: Single
• Rail/rail I/o Type: No
• Power Supply Rejection Ratio: 65dB
• Single Supply Voltage (min): 2.7V
• Single Supply Voltage (max): 5.5V
• Dual Supply Voltage (min): Not RequiredV
• Dual Supply Voltage (max): Not RequiredV
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 9
• Package Type: uSMD
• Lead Free Status / Rohs Status: Not Compliant

www.national.com
Application Information
the shutdown voltage has crossed the threshold. To mini-
mize the supply current while in the shutdown state, the
Shutdown pin should be driven to GND or left floating. If the
Shutdown pin is not driven to GND, the amount of additional
resistor current due to the internal shutdown resistor can be
found by Equation (1) below.
With only a 0.5V difference, an additional 8.3µA of current
will be drawn while in the shutdown state.
GAIN SELECTION FUNCTION
The LM4667 has fixed selectable gain to minimize external
components, increase flexibility and simplify design. For a
differential gain of 6dB, the Gain Select pin should be per-
(V
SD
- GND) / 60kΩ
(Continued)
(1)
10
manently connected to V
For a differential gain of 12dB, the Gain Select pin should be
permanently connected to GND or driven to a logic low level.
The gain of the LM4667 can be switched while the amplifier
is in PLAY mode driving a load with a signal without damage
to the IC. The voltage on the Gain Select pin should be
switched quickly between GND (logic low) and V
high) to eliminate any possible audible artifacts from appear-
ing at the output. For typical threshold voltages for the Gain
Select function, refer to the Gain Threshold Voltages graph
in the Typical Performance Characteristics section.
DD
or driven to a logic high level.
DD
(logic