CKD510JB0J226S TDK Corporation, CKD510JB0J226S Datasheet - Page 11

• Manufacturer Part Number: CKD510JB0J226S
• Description: 3 Term
• Manufacturer: TDK Corporation
• Series: CKDr

Specifications of CKD510JB0J226S

• Capacitance: 22µF
• Voltage: 6.3V
• Current: 4A
• Dc Resistance (dcr): 5 mOhm Max
• Operating Temperature: -
• Package / Case: 0805 (2012 Metric)
• Tolerance: - 20 %, 50 %
• Voltage Rating: 6.3 Volts
• Operating Temperature Range: - 55 C to + 85 C
• Product: General Type MLCCs
• Dimensions: 1.25 mm W x 2 mm L x 0.85 mm H
• Maximum Dc Current: 4000 mAmps
• Termination Style: SMD/SMT
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

• All specifications are subject to change without notice. Please read the precautions before using the product.
No.
12
*As for the initial measurement of capacitors on number 9, 10 and 11, leave capacitors at 150 —10, 0°C for 1 hour and
measure the value after leaving capacitors for 24±2h in ambient condition.
General
Specifications
Item
Life
External
appearance
Capacitance
D.F. (Class 2)
Insulation
Resistance
Resistance
for DC (R
dc
)
Performance
No mechanical damage.
200% of initial spec. max.
1,000MΩ or 50MΩ•μF min.,
whichever smaller. (As for the
capacitors of rated voltage 16, 10, 6.3V
DC, 10MΩ•μF min.)
1.0 Ω max.
Change from the value
before test
± 15%
CKD Series — Feed Through Capacitors
US Catalog // CKD Series — Low ESL Feed Through Capacitors// Version A11
Test or Inspection Method
Reflow solder the capacitor on P.C. board (shown in
Appendix 1, Appendix 3 or Appendix 5) before testing.
Voltage shall be applied at maximum operating
temperature ±2ºC for 1,000 +48, 0h.
Applied voltage is 1xRV; however some items may be
tested at higher voltage (1.2x, 1.5x or 2xRV).
Charge/discharge current shall not exceed 50mA.
Leave the capacitor in ambient conditions for 24±2h
before measurement.
Voltage conditioning:
Voltage treats the capacitor under testing temperature
and voltage for 1 hour.
Leave the capacitor in ambient conditions for 24±2h
before measurement.
Use this measurement for initial value.