4-794627-4 TE Connectivity, 4-794627-4 Datasheet
4-794627-4
Specifications of 4-794627-4
Related parts for 4-794627-4
4-794627-4 Summary of contents
Page 1
... This specification covers performance, tests and quality requirements for the 3 mm Micro MATE-N- LOK* connector family. This connector family has wire-to-board and wire-to-wire configurations. The connectors are available positions in a double row configuration, and positions in a single row configuration, with both configurations using AWG wire. ...
Page 2
... Voltage: 250 volts Current: See Figure 1 for applicable current carrying capability ! Temperature: -40 to 105° C 3.4. Performance and Test Description Product is designed to meet the electrical, mechanical and environmental performance requirements specified in Figure 1. Unless otherwise specified, all tests shall be performed at ambient environmental conditions per EIA-364 ...
Page 3
... EIA-364-29. Apply an axial load of 1.4 kg [3.1 lb] to contacts at a rate of 0. lb] per second and hold for 6 seconds. EIA-364-29. Apply an axial load of 1. lb] to contacts at a rate of 0. lb] per second and hold for 6 seconds ...
Page 4
... C. EIA-364-31, Method III. Subject specimens to 10 cycles (10 days) between 25 and 65° 100% RH. EIA-364-17, Method A, Test Condition 4, Test Time Condition C. Subject mated specimens to 105° C for 500 hours. EIA-364-65, Class IIA. Subject mated specimens to environmental Class IIA for 20 days. ...
Page 5
... Thermal shock Humidity/temperature cycling Temperature life Mixed flowing gas Final examination of product (a) See paragraph 4.1.A. NOTE (b) Numbers indicate sequence in which tests are performed. (c) Test omitted when testing wire-to-wire connectors. (d) The fourth test in this sequence will be either humidity/temperature cycling for tin plated specimens or mixed flowing gas for gold plated specimens ...
Page 6
... If product failure occurs, corrective action shall be taken and specimens resubmitted for qualification. Testing to confirm corrective action is required before resubmittal. 4.4. Quality Conformance Inspection The applicable quality inspection plan shall specify the sampling acceptable quality level to be used. ...
Page 7
... Resistance due to X length of wire removed from all readings. NOTE Vibration & Mechanical Shock Mounting Fixture Rev D Figure 3 Termination Resistance Measurement Points Figure 4 108-1836 ...