MCP23S17-E/SP Microchip Technology, MCP23S17-E/SP Datasheet - Page 15

• Manufacturer Part Number: MCP23S17-E/SP
• Description: IC I/O EXPANDER SPI 16B 28SDIP
• Manufacturer: Microchip Technology
• Type: I/O Expanderr

Specifications of MCP23S17-E/SP

• Package / Case: 28-DIP (0.300", 7.62mm)
• Interface: SPI
• Number Of I /o: 16
• Interrupt Output: Yes
• Frequency - Clock: 10MHz
• Voltage - Supply: 1.8 V ~ 5.5 V
• Operating Temperature: -40°C ~ 125°C
• Mounting Type: Through Hole
• Maximum Operating Temperature: + 125 C
• Minimum Operating Temperature: - 40 C
• Mounting Style: Through Hole
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: MCP23X17EV - BOARD EVAL FOR MCP23X17GPIODM-KPLCD - BOARD DEMO LCD GPIO EXP KEYPAD
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

1.6.4
The default comparison value is configured in the
DEFVAL register. If enabled (via GPINTEN and
INTCON) to compare against the DEFVAL register, an
opposite value on the associated pin will cause an
interrupt to occur.
REGISTER 1-4:
© 2007 Microchip Technology Inc.
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7-0
R/W-0
DEF7
DEFAULT COMPARE REGISTER
FOR INTERRUPT-ON-CHANGE
DEF7:DEF0: These bits set the compare value for pins configured for interrupt-on-change from
defaults <7:0>. Refer to INTCON.
If the associated pin level is the opposite from the register bit, an interrupt occurs.
Refer to INTCON and GPINTEN.
R/W-0
DEF6
DEFVAL – DEFAULT VALUE REGISTER (ADDR 0x03)
W = Writable bit
‘1’ = Bit is set
R/W-0
DEF5
R/W-0
DEF4
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
MCP23017/MCP23S17
R/W-0
DEF3
R/W-0
DEF2
x = Bit is unknown
R/W-0
DEF1
DS21952B-page 15
R/W-0
DEF0
bit 0