GCN1-060 Omron, GCN1-060 Datasheet - Page 90
![no-image](/images/manufacturer_photos/0/4/494/omron_sml.jpg)
GCN1-060
Manufacturer Part Number
GCN1-060
Description
CABLE MULTI I/O CONNECTING .6M
Manufacturer
Omron
Datasheet
1.XW4B-05C4-TF-D.pdf
(166 pages)
Specifications of GCN1-060
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Other names
GCN1060
- Current page: 90 of 166
- Download datasheet (4Mb)
2-4-4
Wiring Methods
Connecting to T-branch Taps and Nodes
Note
6. Insert the contact block into the cover, aligning the positioning key (trian-
7. Tighten the cover lock so that the contact block and cover are firmly joined.
8. Tighten the cap to the cover firmly, making sure the water-tight bushing
Align the cable connector with the socket on the T-branch Tap or Node as
shown in the following diagram and fully insert the connector into the socket.
Tighten the set screws to secure the connection. Tighten the screws to a
torque of between 0.25 and 0.3 N ⋅ m.
1. To avoid damaging the cable or breaking wires, leave some slack in the ca-
2. The orientation of the node connector is different in some other Units.
• Example 1: Connecting to a DCN1-1C T-branch Tap
• Example 2: Connecting to a CV-series Master Unit
gular mark) on the contact block with the triangular mark on the cover.
Tighten to a torque of between 0.39 and 0.49 N ⋅ m.
and cable clamp are inserted properly. Tighten to a torque of between 0.39
and 0.49 N ⋅ m.
ble so that it won’t be pulled too hard or bent too sharply when connecting.
Also, never put heavy objects on top of the cable.
Verify that the cable’s wire colors match the colors on the label next to the
node connector.
Attachment screw
T-branch Tap
Connector
Node (Master)
Connector
Attachment screw
Cable Connector
Cable Connector
Section 2-4
69