B7A-T10M2 Omron, B7A-T10M2 Datasheet - Page 4

• Manufacturer Part Number: B7A-T10M2
• Description: TERM BLOCK PLC 10POS TTL IN PCB
• Manufacturer: Omron

Specifications of B7A-T10M2

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: B7AT10M2

B7A-P P P P 10
Output Models
Note: 1. Consumption when all 10 points are ON. Excludes external load current and error load current for Output Terminals.
Nomenclature
Indicator Operation
Note: G: Green indicator lit; R: Red indicator lit;
4
Output configuration
Current consumption
(See Note 1)
Operating voltage range
Rated load voltage
Output residual voltage
Output current
Error processing
Mounting strength
Terminal strength
Tightening torque
Output logic (See Note 2)
Weight
POWER
(Input Terminal)
POWER/ERR
(Output Terminal)
I/O
2. Refer to I/O Status in the B7A Technical Reference for the relationship between the output logic and output ON/OFF status of
O: Orange indicator lit; N: Not lit
Indicator
the B7A.
Item
G Lit when power is supplied and the
N
G Lit when power is supplied and the
R
N
O Lit when the input signals are ON.
N
Terminal is operating.
Not lit when power is not supplied.
Terminal is operating without error.
Lit during transmission errors.
Not lit when power is not supplied.
Not lit when the signals are OFF.
Power supply/error
indicator
NPN open collector
80 mA max. with all output terminals ON
12 to 24 VDC
5 to 24 VDC
0.8 V max.
Sink current, 100 mA max./point
HOLD
No damage when 5 kgf (49 N) pull is applied for 1 min
each in all directions (except in direction of DIN track)
No damage when 5 kgf (49 N) pull is applied for 1 min
each in all directions
8 to 12 kgf : cm {0.78 to 1.18 N : m}
Approx. 110 g
------
Function
Screw terminal models
B7A-R10SC01
Power terminals
Transmission terminals
Recommended Solderless Terminals
0.75 mm
1.25 mm
I/O indicators
Wire
2
2
(AWG#18) RAV 1.25 to 3.5 (vinyl-insulated round
(AWG#16)
40 mA max. with all output terminals ON
Sink current, 50 mA max./point
Active high (N/P terminals open)
Active low (N/P terminals connected to 0 V)
Approx. 21 g
I/O terminals
------
------
------
Printed circuit board models
wire) or RAP 1 25 to 3 5
wire) or RAP 1.25 to 3.5
(nylon-insulated round wire)
B7A-R10MC
JIS specifications
B7A-P P P P 10