GCN1-100 Omron, GCN1-100 Datasheet - Page 93

• Manufacturer Part Number: GCN1-100
• Description: CABLE MULTI I/O 1M
• Manufacturer: Omron

Specifications of GCN1-100

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: GCN1100

Wiring Methods
Preparing DCN4-BR4 Flat Connector Plugs
Component Names
72
1,2,3...
Note
■
Cutting the Cable
1. As shown below, align the center (see arrows) of the connector cover with
2. Squeeze firmly on the Pliers until the lock on the connector clicks into
3. After attaching the cable, confirm that it is properly pressure-welded as
Cut the cable perpendicular to the length.
Lock lever
(1) Do not pressure-weld the connector cover at the edges.
(2) Do not pressure-weld the connector cover at the back of the pressure-
(3) Set the connector in the correct orientation.
Black
the center of the pressure-welding block on the Pliers.
place.
shown below.
Pliers
welding block.
NG
OK
Be sure the connector is locked on both the left and right sides.
Be sure there are no gaps here.
Cable labels
(Flat cable: black, blue, white, and red)
Connector cover
NG
Section 2-4