CPM2C-CN111 Omron, CPM2C-CN111 Datasheet - Page 29
![no-image](/images/manufacturer_photos/0/4/494/omron_sml.jpg)
CPM2C-CN111
Manufacturer Part Number
CPM2C-CN111
Description
CABLE RS-232/PERI PORT COMBO
Manufacturer
Omron
Datasheet
1.CPM2C-10C1DR-D.pdf
(35 pages)
Specifications of CPM2C-CN111
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Other names
CPM2CCN111
Peripheral Port Connection
Note: 1. The CS1W-CN226/626 Connecting Cables cannot be used to connect to the CPM2C-CIF01. They can be used to connect to
A--120
IBM PC/AT or
compatible computer
2. The CS1W-CN225/625 and CS1W-CN227/627 Connecting Cables cannot be used.
3. The CQM1-CIF11 Connecting Cable cannot be used. If one is connected, the CPM2C will not recognize it and, for this reason,
4. When connecting the CS1W-CN118 to the mini-peripheral port of the CPM2C-CIF01-V1 Peripheral/RS-232C Adapter Unit, turn
5. When connecting the CS1W-CN226/626 to the mini-peripheral port of the CPM2C-CIF01-V1 Peripheral/RS-232C Adapter Unit,
the CPM2C-CIF01-V1 only. Turn OFF the cable switch (SW1) on the front panel when using these cables. (Turn OFF SW1
when using any other cable.)
the PC will enter RUN mode at startup if the PC Setup (DM 6600) is at the default settings (i.e., the start up mode depends on
whether or not a Programming Device is connected).
OFF the cable switch (SW1).
turn ON the cable switch (SW1).
Micro Programmable Controller
CQM1-CIF02 (3.3 m)
CS1W-CN226 (2 m)
CS1W-CN626 (6 m)
(See Note 5.)
CPM2C
Peripheral port
CPM2C-CN111 (0.15 m)
CS1W-CN114 (0.05 m)
(See Note 4.)
CPM2C-CIFO1-V1
CPM2C CPU Unit