G79-I50-25-D1 Omron, G79-I50-25-D1 Datasheet
![no-image](/images/manufacturer_photos/0/4/494/omron_sml.jpg)
G79-I50-25-D1
Specifications of G79-I50-25-D1
G79-I50-25-D1 Summary of contents
Page 1
Open Network for High-Speed Control High Speed Sensor & Actuator Network » Extremely Fast Communications » Powerful Diagnostic Information » Simple Installation & Low Cost Solutions ...
Page 2
Communications Specifications Item Communications protocol CompoNet Network protocol Remote I/O communications (programless, constant sharing of data with Slave Units) and message Types of communications communications (explicit message communications as required with Slave Units and FINS message communications as required with ...
Page 3
CompoNet Master Units CS/CJ-series CompoNet Master Units ..................................................................................4 ■CS1W/CJ1W-CRM21 ■ Standards Certification is given as of March 2009. Enquire for application conditions For the USA Name of standard UL CompoNet-compliant UL508 standard Abbreviation in this U catalog CRT1-series Smart Slave ...
Page 4
CS/CJ-series CompoNet Master Units CS1W/CJ1W-CRM21 CS/CJ-series CompoNet Master Units Increase the Range of Applicability of Sensors and Actuators. The CS/CJ-series CompoNet Master Unit manages the CompoNet network, controls communications between the PLC and Slave Units, and handles I/O data and ...
Page 5
Master Unit Specifications Item Model Applicable PLC All CS-series PLCs Unit classification CS-series Special I/O Unit Current consumption (Power sup- 400 mA max VDC plied from PLC’s Power Supply Unit) Communications power supply con- One connector for the ...
Page 6
Dimensions CJ1W-CRM21 CRM21 +100 MACH No X10 X10 MODE ON 1 DR0 2 DR1 3 ESTP 4 REGS NETWORK POWER SUPPLY BS+ BS- DC24V INPUT 34.5 ...
Page 7
CompoNet Slave Unit CRT1 Series/ CompoNet Repeater Unit CRS1 Series Smart Functions ............................................................................................................................................. 8 What Are Smart Functions? ......................................................................................................................... 19 Performance Specifications..........................................................................................................................22 Digital I/O Slave Units with Screw Terminal Blocks (2-tier Terminal Block/Relay Output/SSR Output ........................... 23 ■CRT1-@D08(-1)/@D16(-1)/ROS@/ROF@ Digital I/O ...
Page 8
Smart Functions The Slave Units provide Smart Functions that powerfully aid in everything from building the system and initial system startup to preven- tive system maintenance. The Smart Functions include functions for monitoring the operation time, changes in operating values, ...
Page 9
Function Operation Time Monitor Contact Operation Monitor (See note.) Total ON Time Monitor (See note.) Automatic Baud Rate Detection Unit Conduction Time Monitor Naming Units Naming Connected Devices Network Power Voltage Monitor I/O Power Status Monitor Communications Error History Monitor ...
Page 10
Function Operation Time Monitor Contact Operation Monitor (See note.) Total ON Time Monitor (See note.) Automatic Baud Rate Detection Unit Conduction Time Monitor Naming Units Naming Connected Devices Network Power Voltage Monitor I/O Power Status Monitor Communications Error History Monitor ...
Page 11
Function Operation Time Monitor Contact Operation Monitor (See note.) Total ON Time Monitor (See note.) Automatic Baud Rate Detection Unit Conduction Time Monitor Naming Units Naming Connected Devices Network Power Voltage Monitor I/O Power Status Monitor Communications Error History Monitor ...
Page 12
Function Operation Time Monitor Contact Operation Monitor (See note.) Total ON Time Monitor (See note.) Automatic Baud Rate Detection Unit Conduction Time Monitor Naming Units Naming Connected Devices Network Power Voltage Monitor I/O Power Status Monitor Communications Error History Monitor ...
Page 13
Function Operation Time Monitor Contact Operation Monitor (See note.) Total ON Time Monitor (See note.) Automatic Baud Rate Detection Unit Conduction Time Monitor Naming Units Naming Connected Devices Network Power Voltage Monitor I/O Power Status Monitor Communications Error History Monitor ...
Page 14
Function Operation Time Monitor Contact Operation Monitor (See note.) Total ON Time Monitor (See note.) Automatic Baud Rate Detection Unit Conduction Time Monitor Naming Units Naming Connected Devices Network Power Voltage Monitor I/O Power Status Monitor Communications Error History Monitor ...
Page 15
Function Operation Time Monitor Contact Operation Monitor (See note.) Total ON Time Monitor (See note.) Automatic Baud Rate Detection Unit Conduction Time Monitor Naming Units Naming Connected Devices Network Power Voltage Monitor I/O Power Status Monitor Communications Error History Monitor ...
Page 16
Function Operation Time Monitor Contact Operation Monitor (See note.) Total ON Time Monitor (See note.) Automatic Baud Rate Detection Unit Conduction Time Monitor Naming Units Naming Connected Devices Network Power Voltage Monitor I/O Power Status Monitor Communications Error History Monitor ...
Page 17
Function Operation Time Monitor Contact Operation Monitor (See note.) Total ON Time Monitor (See note.) Automatic Baud Rate Detection Unit Conduction Time Monitor Naming Units Naming Connected Devices Network Power Voltage Monitor I/O Power Status Monitor Communications Error History Monitor ...
Page 18
Unit Function Operation Time Monitor Contact Operation Monitor (See note.) Total ON Time Monitor (See note.) Automatic Baud Rate Detection Unit Conduction Time Monitor Naming Units Naming Connected Devices Network Power Voltage Monitor I/O Power Status Monitor Communications Error History ...
Page 19
What Are Smart Functions? ■ Smart Functions ● Network Power Voltage Monitor The Network Power Voltage Monitor function stores the present value, minimum value, and maximum value of the network power voltage in the Slave Unit memory monitor ...
Page 20
Total ON Time Monitor (Digital I/O Slave, Bit Slave Input Units Only) This function totals the time that each input and output contact is ON (unit: s) and stores this total time in the Slave Unit memory. (This data ...
Page 21
... ON again. Note: The OMRON S82J-series Power Supply Unit is recommended as the I/O power supply. Load short-circuits may not be detected for power supplies with an inverted L overcurrent protection characteristic. If using a power supply with an inverted L overcurrent protection characteristic, use one rated 100 W or higher ...
Page 22
Performance Specifications Item Communications power supply voltage I/O power supply voltage Noise immunity Vibration resistance Shock resistance Dielectric strength Insulation resistance Ambient operating temperature Ambient operating humidity Ambient operating atmosphere Storage temperature Storage humidity Terminal block screw tightening torque (See ...
Page 23
Digital I/O Slave Units with Screw Terminal Blocks (2-tier Terminal Block/Relay Output/SSR Output) CRT1-@D08(-1)/@D16(-1)/ROS@/ROF@ Visualize the actual worksite status! Simple and Intelligent I/O Slave Units. In addition to the Digital I/O Slave Unit's basic digital ON/OFF sig- nals, collect useful ...
Page 24
Performance Specifications ● Relay Output Item Communications power supply 14 to 26.4 VDC voltage Conforms to IEC 61000-4- Noise immunity (power line). Vibration resistance with double-amplitude of 0.7 mm Shock resistance 100 m/s 2 ...
Page 25
Output Section Specifications ● Eight-point Output Units (2-tier Terminal Block) Item Model CRT1-OD08 I/O capacity 8 outputs Internal I/O common NPN Rated output current 0.5 A/output, 2 A/common 1.2 V max. (0.5 A DC, between each Residual voltage output terminal ...
Page 26
Eight-point Output Units (SSR Outputs) (per Output) Item Model CRT1-ROF08 I/O capacity 8 outputs Load voltage 24 to 265 VAC Load current 0.3 A (See note.) Inrush current resistivity 50 A (60 Hz) Installation method DIN Track 60 mA ...
Page 27
Input and Output Section Specifications ● Eight-point Input and Eight-point Output Units (2-tier Terminal Block) CRT1-MD16/CRT1-MD16-1 Common Specifications Item Model CRT1-MD16 Installation DIN Track 35 mA max. for 24-VDC power supply Communications power supply voltage current consumption 60 mA max. ...
Page 28
Dimensions CRT1-ID08 (-1) CRT1-OD08 (-1) When a DCN4-TB4 Open Type Connectors Is Mounted CRT1-ID16 (-1) CRT1-OD16 (-1) When a DCN4-TB4 Open Type Connectors Is Mounted CRT1-MD16 (-1) When a DCN4-TB4 Open Type Connectors Is Mounted 28 Digital I/O Slave Units ...
Page 29
CRT1-ROS08 CRT1-ROF08 When a DCN4-TB4 Open Type Connectors Is Mounted CRT1-ROS16 CRT1-ROF16 When a DCN4-TB4 Open Type Connectors Is Mounted Digital I/O Slave Units with Screw Terminal Blocks (2-tier Terminal Block/Relay Output/SSR Output) 95 140 CRT1-@D08(-1)/@D16(-1)/ROS@/ROF@ 29 ...
Page 30
Digital I/O Slave Units with Screw Terminal Blocks (3-tier Terminal Block) CRT1-@D08TA(-1)/@D16TA(-1)/@D08TAH(-1)/@D16TAH(-1) With the relay terminal blocks, doubling up wires on terminals is not necessary! Smart Slave Units with Easy-to-understand Wiring Locations with One Common for Every Point. Doubling up ...
Page 31
Input Section Specifications ● Eight-point Input Units (3-tier Terminal Block) Item Model CRT1-ID08TA I/O capacity 8 inputs Internal I/O common NPN 15 VDC min. (between each input ON voltage terminal and the V terminal) 5 VDC max. (between each input ...
Page 32
Output Section Specifications ● Eight-point Output Units (3-tier Terminal Block) Item Model CRT1-OD08TA I/O capacity 8 outputs Internal I/O common NPN Rated output current 0.5 A/output, 2 A/common 1.2 V max. (0.5 A DC, between each Residual voltage output terminal ...
Page 33
Input and Output Section Specifications ● 8-point Input and 8-point Output Units (3-tier Terminal Block) Common Specifications Item Model CRT1-MD16TA Installation DIN Track Communications power supply 40 mA max. for 24-VDC power supply voltage current consumption 60 mA max. for ...
Page 34
Dimensions CRT1-ID08TA (-1) CRT1-OD08TA(-1) When a DCN4-TB4 Open Type Connectors Is Mounted CRT1-ID16TA(-1) CRT1-OD16TA(-1 CRT1-MD16TA(-1) When a DCN4-TB4 Open Type Connectors Is Mounted 34 Digital I/O Slave Units with Screw Terminal Blocks (3-tier Terminal Block) 105 180 CRT1-@D08TA(-1)/@D16TA(-1)/@D08TAH(-1)/@D16TAH(-1) (Unit: mm) ...
Page 35
Digital I/O Slave Units with e-CON Connectors CRT1-@D16S(-1)/@D32S(-1)/@D16SH(-1)/@D32SH(-1) Industry-standard Sensor Connectors for Easy Connection to Pre-wired Sensors without Special Tools. • A digital I/O terminal with industry-standard e-CON connectors. • Easy to install without the use of special tools. Reduces ...
Page 36
Input Section Specifications ● Sixteen-point Input Units Item Model CRT1-ID16S I/O capacity 16 inputs Internal I/O common NPN 10.5 VDC min. (between each ON voltage input terminal and the V terminal) OFF current 1 mA max VDC: 6.0 ...
Page 37
Output Section Specifications ● Sixteen-point Output Unit Item Model CRT1-OD16S I/O capacity 16 outputs Internal I/O common NPN Rated output current 0.5 A/output, 4 A/common 1.2 V max. (0.5 A DC, between each Residual voltage output terminal and the G ...
Page 38
Input and Output Section Specifications ● 8-point Input and 8-point Output Units Common Specifications Item Model CRT1-MD16S Installation DIN Track Communications power supply 75 mA max. for 24-VDC power supply voltage current consumption 95 mA max. for 14-VDC power supply ...
Page 39
Input and 16-point Output Units Common Specifications Item Model CRT1-MD32S Installation DIN Track Communications power supply 45 mA max. for 24-VDC power supply voltage current consumption 70 mA max. for 14-VDC power supply voltage Weight 180 g max. ...
Page 40
Dimensions CRT1-ID16S (-1) CRT1-ID16SH (-1) CRT1-MD16S (-1) CRT1-MD16SH (-1) CRT1-OD16S (-1) CRT1-OD16SH (-1) CRT1-ID32S (-1) CRT1-ID32SH (-1) 40 Digital I/O Slave Units with e-CON Connectors When a DCN4-TB4 Open Type Connectors Is Mounted 95 When a DCN4-TB4 Open Type Connectors ...
Page 41
CRT1-OD32S (-1) CRT1-OD32SH (-1) CRT1-MD32S (-1) CRT1-MD32SH (-1) Digital I/O Slave Units with e-CON Connectors When a DCN4-TB4 Open Type Connectors Is Mounted 160 When a DCN4-TB4 Open Type Connectors Is Mounted 160 CRT1-@D16S(-1)/@D32S(-1)/@D16SH(-1)/@D32SH(-1) 41 ...
Page 42
Digital I/O Slave Units with e-CON Connector (Vertical type) CRT1-VID08S(-1)/VOD08S(-1) A vertical slave unit of little wiring and size Industrial standard e-CON connectors allow direct connection of the unit to sensing devices without use of terminal blocks. This minimizes requirement ...
Page 43
Input Section Specifications Item Model CRT1-VID08S I/O capacity 8 inputs Internal I/O common NPN 10.5 VDC min. (between each ON voltage input terminal and the V terminal) 5 VDC max. (between each OFF voltage input terminal and the V terminal) ...
Page 44
Digital I/O Slave Units with MIL Connector (Vertical type) CRT1-VID16ML(-1)/VOD16ML(-1) Thinnest in the industry! Ultimately little space and wiring are required. MIL connectors expand I/O interface options to include direct connection to actuators and to terminal block conversion units. • ...
Page 45
Input Section Specifications Item Model CRT1-VID16ML I/O capacity 16 inputs Internal I/O common NPN 17 VDC min. (between each ON voltage input terminal and the V terminal) 5 VDC max. (between each OFF voltage input terminal and the V terminal) ...
Page 46
Digital I/O Slave Units with MIL Connector (Vertical type) CRT1-VID32ML(-1)/VOD32ML(-1)/VMD32ML(-1) Aggregation of multi-I/O points! A compact and little wiring slave with 32 points and MIL connector MIL connectors expand I/O interface options to include collective connection of multiple I/O points ...
Page 47
Input Section Specifications Item Model CRT1-VID32ML I/O capacity 32 inputs Internal I/O common NPN 17 VDC min. (between each ON voltage input terminal and the V terminal) 5 VDC max. (between each OFF voltage input terminal and the V terminal) ...
Page 48
Input Section Specifications Item Model CRT1-VMD32ML I/O capacity 16 inputs Internal I/O common NPN 17 VDC min. (between each ON voltage input terminal and the V terminal) 5 VDC min. (between each OFF voltage input terminal and the V terminal) ...
Page 49
Digital I/O Slaves Units with Clamp Terminals CRT1-@D08SL(-1)/@D16SL(-1) Screw-less Terminal Wiring Further Reduces Wiring Work and Saves Labor at the Production Site. • Screw-less (M3) design eliminates the need for extra tightening. • Removable terminal block gives powerful support to ...
Page 50
Input Section Specifications ● Eight-point Input Units Item Model CRT1-ID08SL I/O capacity 8 inputs Internal I/O common NPN 15 VDC min. (between each ON voltage input terminal and the V terminal) 5 VDC max. (between each OFF voltage input terminal ...
Page 51
Input and Output Section Specifications ● Eight-point Input and Eight-point Output Units Common Specifications Item Specification Model CRT1-MD16SL Installation DIN Track 35 mA max. for 24-VDC power supply Communications power supply voltage current consumption 60 mA max. for 14-VDC power ...
Page 52
Dimensions CRT1-ID08SL (-1) CRT1-OD08SL (-1) CRT1-ID16SL (-1) CRT1-OD16SL (-1) CRT1-MD16SL (-1) 52 Digital I/O Slaves Units with Clamp Terminals When a DCN4-TB4 Open Type Connectors Is Mounted 96 When a DCN4-TB4 Open Type Connectors Is Mounted 132 When a DCN4-TB4 ...
Page 53
Analog I/O Slave Units CRT1-AD04/DA02 Convert to Smart for Smarter Processing! Simple and Intelligent Analog I/O Slaves In addition to analog data input and output, Analog I/O Slave Units can use a variety of functions internally, such as scaling, that ...
Page 54
Input Section Specifications Item Voltage input Model CRT1-AD04 Input signal ranges – ±15 V Maximum signal input 1 M Ω min. Input impedance Resolution 1/6,000 ...
Page 55
Analog I/O Slave Units with MIL Connectors/e-CON Connectors CRT1-VAD04@@/-VDA02@@ Analog Slave Units with the Industry's Narrowest Width Help Save Space in Equipment and Panels • The series includes Slave Units with a width of only 15 mm, the narrowest in ...
Page 56
Input Section Specifications ● Four-point Analog Input Unit (with MIL Connectors) CRT1-VAD04ML Item Voltage input Input signal ranges – ± Maximum signal input 15 V ...
Page 57
Dimensions ● Four-point Analog Input Unit (with MIL Connectors) CRT1-VAD04ML Note: The numbers inside the parentheses are reference dimensions. ● Two-point Analog Output Unit (with MIL Connectors) CRT1-VDA02ML Note: The numbers inside the parentheses are reference dimensions. Analog I/O Slave ...
Page 58
Four-point Analog Input Unit (with e-CON Connectors) CRT1-VAD04S Note: The numbers inside the parentheses are reference dimensions. ● Two-point Analog Output Unit (with e-CON Connectors) CRT1-VDA02S Note: The numbers inside the parentheses are reference dimensions. 58 Analog I/O Slave ...
Page 59
Temperature Input Units CRT1-TS04T/-TS04P High-speed Transfer of Temperature Data with CompoNet. Enhanced Smart Functions. You can use either of two types of temperature input sensors: Thermo- couple and resistance thermometer. Each Unit provides four temperature inputs. Plus, the Units support ...
Page 60
Specifications Item model Switchable between and PL2 When set with CX-Integrator: Input types can be set individually Input type for each input. Wen set with DIP switch: The same ...
Page 61
Dimensions CRT1-TS04T CRT1-TS04P 115 Temperature Input Units (Unit: mm) CRT1-TS04T/-TS04P 61 ...
Page 62
Expansion Units XWT-ID08(-1)/OD08(-1)/ID16(-1)/OD16(-1) Expansion I/O Units make expansion easy! One Expansion Unit can be added to each Digital I/O Slave Unit. This makes a variety of I/O combinations possible, such as 16 inputs + 8 outputs, extending the range of ...
Page 63
Output Section Specifications Item Model XWT-OD08 Internal I/O common NPN I/O capacity 8 outputs Rated output current 0.5 A/output, 2.0 A/common 1.2 V max. (0.5 A DC, between Residual voltage each output terminal and the G terminal) Leakage current 0.1 ...
Page 64
SmartSlice GRT1-series Flexible I/O Configuration Matched to the Application to Down- size Panels, Lower Costs, and Reduce Wiring Work. System Configuration PLC CS/CJ-series CompoNet Master Unit Remote I/O communications Data from the Slice I/O Units connected to the Communications Unit ...
Page 65
SmartSlice CompoNet Communications Unit GRT1-CRT The CompoNet-compliant unit can inter- face up to 256 inputs and 256 outputs at one node. • Connects SmartSlice I/O Units. • Concentrate I/O at one Slave 256 inputs ...
Page 66
... I/O Terminal into blocks to use more than 80 W.) Terminal block SmartSlice I/O Terminal Main block and a maximum of two expansion blocks blocks Current consumption for max. O power supply Weight 125 g Accessories None Dimensions GRT1-CRT 23.1 25.1 61.2 69.7 66 SmartSlice CompoNet Communications Unit ...
Page 67
SmartSlice Ordering Information Name Appearance CompoNet Communication Unit Digital I/O Units Slice I/O Units Analog I/O Units Temperature Input (Resistance Thermometers) Counter Units Turnback Units Turnback Cable System Units I/O Power Feed Unit End Unit *1 Option Terminal Block *1 ...
Page 68
Bit Slave Units with e-CON Connectors CRT1B-@D02S(-1)/@D02SP(-1)/ID04SP(-1) Simple and Intelligent Bit Slaves with Industry-standard e-CON connectors. Slave Units capable of 2- and 4-point bit-level distribution. The I/O power supply is supplied from the communications power in the previously connected flat ...
Page 69
Input Section Specifications Item Model CRT1B-ID02S I/O capacity 2 inputs Internal I/O common NPN 10.5 VDC min. (between each input ON voltage terminal and the V terminal) 5 VDC max. (between each input OFF voltage terminal and the V terminal) ...
Page 70
Output Section Specifications Item Model CRT1B-OD02S I/O capacity 2 outputs Internal I/O common NPN Rated output current 0.2 A/output Load power supply Communications power supply voltage + 0 V (max.) Communications power supply voltage − 1.2 V (min.) voltage 1.2 ...
Page 71
Dimensions CRT1B-ID02S(-1) CRT1B-OD02S(-1) 32.1 CRT1B-ID02SP(-1) CRT1B-OD02SP(-1) CRT1B-ID04SP(-1) Bit Slave Units with e-CON Connectors (548) Figures in parentheses are reference dimensions. 48 5.7 (594.5) 94.5 61.25 Figures in parentheses are reference dimensions. CRT1B-@D02S(-1)/@D02SP(-1)/ID04SP(-1) (Unit: mm) 71 ...
Page 72
Bit Slave Units with Clamp Terminal Blocks CRT1B-MD04SLP(-1) Simple and Intelligent IP54 Bit Slave Units That Resist Dust and Splashing Screw-less dust- and splash-proof IP54 Bit Slaves for bit-level distribution. The I/O power supply is supplied from the communications power ...
Page 73
Output Section Specifications Item Model CRT1B-MD04SLP I/O capacity 2 outputs Internal I/O common NPN Rated output current 0.2 A/output Communications power supply voltage + 0 V (max.) Load power supply voltage Communications power supply voltage − 1.2 V (min.) 1.2 ...
Page 74
Repeater Unit CRS1-RPT01 Simple and Intelligent Repeater Units Ex- tend the Network Repeater Units can make CompoNet Networks easier to wire, and extend cable length. When Repeater Units are connected in series from the Master Unit two extra ...
Page 75
... CRIMPFOX UD6 (Product No. 1204436) AI0,5-10 WH 0.5 mm (AWG20) or CRIMPTFOX ZA3 series Crimper PZ1.5 H0.5/16 orange 0.5 mm (AWG20) (Product No. 900599) The following screwdriver is recommended for use when remov- ing ferrules. Product number XW4Z-00C OMRON CRS1-RPT01 Repeater Unit Manufacturer Phoenix Contact Weidmuller Manufacturer 75 ...
Page 76
Dimensions CRS1-RPT01 76 CRS1-RPT01 Repeater Unit 95 (Unit: mm) ...
Page 77
... October 2007. The standards are abbreviated as follows; U: UL, U1: UL Class I Division 2 Products for Hazardous Locations, C: CSA, UC: cULus, UC1: cULus Class I Division 2 Products for Hazardous Locations, CU: cUL, N: NK, L: Lloyd, and CE: EC Directive. • Ask your OMRON representative for the conditions under which the standards were met. Performance Specifications Item ...
Page 78
MEMO 78 ...
Page 79
CompoNet Network Configuration Elements ........................................................ 80 CompoNet Network Specification ......................................................................... 81 Communications and I/O Power Supply Wiring .................................................... 82 Connecting External I/O for Slave Units................................................................ 84 ■ Connection Locations for Communications Power Supply ............................ 82 ■ Connecting to e-CON Connector ...
Page 80
CompoNet Network Configuration Elements A CompoNet Network is a remote I/O system that consists of the following elements. CompoNet Master Unit Branch Line Slave Units Trunk line Sub-trunk line Repeater Unit Branch Line Segment 1 Slave Units Repeater Unit Terminating ...
Page 81
Slave Unit I/O information and status information is allocated in the Special I/O Unit memory area or a user-specified area of the CPU Unit to which the Master Unit is mounted. The area is determined by the unit number of ...
Page 82
... Connect an Open Type Connector here. PORT1 BS+ 24-VDC + CRS1-RPA01 communica- tions power supply − BS− Connect an Open Type Connector here. The following screwdriver is recom- mended for removing ferrules. Manufacturer Model XW4Z-00C Terminating resistance Open Type Connector World Slave Unit PORT2 Manufacturer OMRON Corporation ...
Page 83
Restrictions The following restrictions apply when supplying communications power through Round Cable II or Flat Cable. • The communications power supply can be connected at only one location for the trunk line and one location each for the sub-trunk lines. ...
Page 84
... Red 37104-3122-000FL Yellow 37104-3163-000FL Orange 37104-2124-000FL Green 37104-2165-000FL Blue 37104-2206-000FL Gray ● OMRON Connectors Model Specification XN2A-1430 Spring clamp type Appendix 84 Applicable wire range sheath outer diameter: 0.9 to 1.0 mm sheath outer diameter: 0.9 to 1.0 mm sheath outer diameter: 1.0 to 1.15 mm sheath outer diameter: 1.15 to 1.35 mm sheath outer diameter: 1 ...
Page 85
... G79-I@C CRT1-VOD16ML-1/ XWT-VOD16ML-1 G79-O@C G79-I50-25-D1 (50 cm) CRT1-VID32ML G79-I75-50-D1 (75 cm) G79-O50-25-D1 (50 cm) CRT1-VOD32ML G79-O75-50-D1 (75 cm) G79-O50-25-D1 (50 cm) G79-O75-50-D1 (75 cm) CRT1-VOD32ML-1 G79-I50-25-D1 (50 cm) G79-I75-50-D1 (75 cm) G79-M50-25-D1 (50 cm) CRT1-VMD32ML G79-M75-50-D1 (75 cm) G79-M50-25-D2 (50 cm) CRT1-VMD32ML-1 G79-M75-50-D2 (75 cm) Connected Relay Terminal G7TC-ID16 G7TC-IA16 G7TC-OC16/OC08 G7OD-SOC16/VSOC16 G7OD-FOM16/VFOM16 ...
Page 86
... Forked terminals are attached to the loose wires. G79-Y200C (2 m) Forked terminal: 161071-M2 G79-Y300C (3 m) (Nippon Terminal) G79-Y500C (5 m) G79-A200C- Loose wire size: AWG28 G79-A500C- Loose wires are cut. G79-Y100C- Forked terminals are attached to the loose wires. G79-Y200C- Forked terminal: 161071-M2 G79-Y500C- (Nippon Terminal) ...
Page 87
Pressure-welding a Loose-wire Cable to a MIL Connector To prepare a connecting cable by pressure-welding a loose-wire cable to a MIL connector, assemble the connector from the components shown in the following table. • 10-pin Cable Component No polarity ...
Page 88
... RoHS-compliant. S8VM Switch Mode Power Supply (15/30/50/100/150/300/600/1,500-W Models) Power Supply Featuring OMRON's Unique, New Undervoltage Compact Body Contributing to Machine Downsizing • New undervoltage alarm function assists in determining causes of errors (S8VM-@@@24A@/P@ only). • Power failure alarm function provides notification of output voltage errors (300-, 600-, and 1,500-W models only). • ...
Page 89
... UL CompoNet-compliant UL508 standard Abbreviation in this U catalog ● EC Directives The EC Directives applicable to PLCs include the EMC Directives and the Low Voltage Directive. OMRON complies with these directives described below. ● EMC Directives Applicable Standards EMI : EN61131-2 EN61000-6-4 EMS: EN61131-2 EN61000-6-2 PLCs are electrical devices that are incorporated in machines and manufacturing installations ...
Page 90
CompoNet Master Units Name Appearance Type of communications • Remote I/O CS1 Special communications I/O Unit • Message (See note.) communications • Remote I/O CJ1 Special communications I/O Unit • Message com- (See note.) munications Note. These Units are also ...
Page 91
Name Appearance Inputs 8 inputs Outputs 8 outputs Inputs 16 inputs Outputs 16 outputs Inputs/ 8 inputs/ Three-tier Outputs 8 outputs Screw Terminal Inputs 8 inputs Block Outputs 8 outputs Inputs 16 inputs Outputs 16 outputs Inputs/ 8 inputs/ Outputs ...
Page 92
Name Appearance Inputs 16 inputs MIL Connector Outputs 16 outputs Inputs 32 inputs MIL Outputs 32 outputs Connector Inputs/ 16 inputs/ Outputs 16 outputs Inputs 16 inputs Outputs 16 outputs Clamp Terminal Inputs 8 inputs Blocks Outputs 8 outputs Inputs/ ...
Page 93
Expansion Units Name Appearance Inputs Outputs 8 outputs Expansion Units Inputs Outputs 16 outputs ■ Bit Slave Units ● Units with Connectors Name Appearance Inputs IP20 Outputs Inputs IP54 Outputs Inputs ● Units with Clamp Terminals Name Appearance Inputs/ ...
Page 94
SmartSlice GRT1 Series ● CompoNet Communications Unit Name Appearance CompoNet Communication Unit ● Slice I/O Units Name Appearance Digital I/O Units Slice I/O Units Analog I/O Units Temperature Input (Resistance Thermometers) Counter Units ● System Units Name Appearance Turnback ...
Page 95
... Unit ■ Support Software Product name The CX-One is a package that integrates the Support Software for CX-One FA OMRON PLCs and components. CX-One runs on the following OS. Integrated Tool Windows 2000 (Service Pack 3 or higher), XP, or Vista Package CX-One Ver.3.@ includes CX-Integrator Ver. 3.@ For details, refer to the CX-One catalog (Cat ...
Page 96
Peripheral Devices ■ Communications Cables Name Appearance 4-conductor flat cable (UL2555) Flat Cable I Length: 100 m Conductor diameters: 0.75 mm Sheathed 4-conductor flat cable (UL compliant) Flat Cable II Length: 100 m Conductor diameters: 0.75 mm Note. Also can ...
Page 97
For Flat Cable II Name Appearance Use this Connector in a set with a DCN5-BR4 Flat Connector Plug for the following applications. • Extending the trunk line or a sub-trunk line Flat Connector • T-branching from the trunk line ...
Page 98
Manuals Cat. No. Name CompoNet Slave Units and Repeater Unit W457 Operation Manual CJ1W-CRM21/CJ1W-CRM21 CompoNet W456 Master Units Operation Manual SYSMAC CS/CJ/CP Series W342 SYSMAC One NSJ Series Communications Commands Reference Manual W464 CX-Integrator Ver.@.@ Operation Manual GRT1 Series SmartSlice ...
Page 99
... Cancellation; Etc. Orders are not subject to rescheduling or cancellation unless Buyer indemnifies Omron against all related costs or expenses. 10. Force Majeure. Omron shall not be liable for any delay or failure in delivery resulting from causes beyond its control, including earthquakes, fires, floods, strikes or other labor disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots, delay in or lack of transportation or the requirements of any government authority ...
Page 100
... OMRON ELECTRONICS LLC • THE AMERICAS HEADQUARTERS Schaumburg, IL USA • 847.843.7900 • 800.556.6766 • www.omron247.com OMRON CANADA, INC. • HEAD OFFICE Toronto, ON, Canada • 416.286.6465 • 866.986.6766 • www.omron.ca OMRON ELETRÔNICA DO BRASIL LTDA • HEAD OFFICE São Paulo, SP, Brasil • 55.11.2101.6300 • www.omron.com.br OMRON ELECTRONICS MEXICO • ...