SI3010-F-FS Silicon Laboratories Inc, SI3010-F-FS Datasheet - Page 86

• Manufacturer Part Number: SI3010-F-FS
• Description: IC SI2401 ISOMOD LINESIDE 16SOIC
• Manufacturer: Silicon Laboratories Inc
• Type: Chipsetr

Specifications of SI3010-F-FS

• Package / Case: 16-SOIC (3.9mm Width)
• Data Format: V.92
• Interface: Serial
• Voltage - Supply: 3 V ~ 3.6 V
• Mounting Type: Surface Mount
• Product: Modem Module
• Supply Voltage (min): 3 V
• Supply Current: 10 mA
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: 0 C
• Mounting Style: SMD/SMT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Baud Rates: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 336-1286-5

Si3018/19/10
8. Pin Descriptions: Si3018/19/10
86
Pin #
10
12
11
1
2
3
4
5
6
7
8
9
Pin Name
VREG2
VREG
RNG1
RNG2
DCT
C1B
C2B
QE2
QE
RX
SC
IB
Transistor Emitter.
Connects to the emitter of Q3.
DC Termination.
Provides dc termination to the telephone network.
Receive Input.
Serves as the receive side input from the telephone network.
Isolation Capacitor 1B.
Connects to one side of isolation capacitor C1. Used to communicate with the system-
side device.
Internal Bias.
Provides internal bias.
Isolation Capacitor 2B.
Connects to one side of the isolation capacitor C2. Used to communicate with the
system-side device.
Voltage Regulator.
Connects to an external capacitor to provide bypassing for an internal power supply.
Ring 1.
Connects through a resistor to the RING lead of the telephone line. Provides the ring
and caller ID signals to the system-side device.
Ring 2.
Connects through a resistor to the TIP lead of the telephone line. Provides the ring
and caller ID signals to the system-side device.
Voltage Regulator 2.
Connects to an external capacitor to provide bypassing for an internal power supply.
Circuit Enable.
Enables transistor network. Should be tied through a 0 Ω resistor to I
Transistor Emitter 2.
Connects to the emitter of transistor Q4.
Table 25. Si3018/19/10 Pin Descriptions
VREG
RNG1
DCT
C1B
C2B
QE
RX
IB
1
2
3
4
5
6
7
8
Rev. 1.05
16
15
14
13
12
10
11
9
Description
DCT2
IGND
DCT3
QB
QE2
SC
VREG2
RNG2
GND
.