SX8723E083TRT Semtech, SX8723E083TRT Datasheet - Page 39

• Manufacturer Part Number: SX8723E083TRT
• Description: IC DAS PRESSURE/TEMP SENS 12MLPD
• Manufacturer: Semtech
• Series: ZoomingADC™r
• Type: Pressure/Temperature Sensorr

Specifications of SX8723E083TRT

• Input Type: Differential
• Output Type: Digital
• Interface: 2-Wire
• Mounting Type: Surface Mount
• Package / Case: 12-MLPD
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Current - Supply: -
• Lead Free Status / Rohs Status: Compliant
• Other names: SX8723E083TR

ADVANCED COMMUNICATIONS & SENSING
Power Reduction
The ZoomingADC is particularly well suited for low-power applications. When very low power consumption is
of primary concern, such as in battery operated systems, several parameters can be used to reduce power
consumption as follows:
Finally, remember that power reduction is typically traded off with reduced linearity, larger noise and slower
maximum sampling speed.
Recommended Design for Other 2-WIRE Devices Connection
SX8723 does not support multiple devices on the same 2-WIRE bus. A separate 2-WIRE bus should be used to
address other devices as seen on the following schematic.
V1.8 © 2009 Semtech Corp.
1. Operate the acquisition chain with a reduced supply voltage VDD.
2. Disable the PGAs which are not used during analog-to-digital conversion with ENABLE[3:0].
3. Disable all PGAs and the ADC when the system is idle and no conversion is performed.
4. Use lower bias currents in the PGAs and the ADC using the control words IB_AMP_PGA[1:0] and
5. Reduce sampling frequency.
IB_AMP_ADC[1:0].
Figure 22 - Recommended connections with other devices
ZoomingADC™ for Pressure and Temperature Sensing
39
www.semtech.com
SX8723