DS8500-JND+ Maxim Integrated Products, DS8500-JND+ Datasheet

IC MODEM HART SGL 3.6V 20-TQFN

DS8500-JND+

Manufacturer Part Number
DS8500-JND+
Description
IC MODEM HART SGL 3.6V 20-TQFN
Manufacturer
Maxim Integrated Products
Type
Single Chip Modem with Highway Addressable Remote Transducer (HART) capabilitiesr
Datasheet

Specifications of DS8500-JND+

Applications
HART Modem
Interface
Serial
Voltage - Supply
2.7 V ~ 3.6 V
Package / Case
20-TQFN Exposed Pad
Mounting Type
Surface Mount
Product
HART Modem
Interface Type
Serial
Supply Voltage (max)
3.6 V
Supply Voltage (min)
2.7 V
Supply Current
285 uA
Maximum Operating Temperature
+ 85 C
Minimum Operating Temperature
- 40 C
Mounting Style
SMD/SMT
Data Rate
1.2 Kbps
Number Of Channels
1
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
The DS8500 is a single-chip modem with Highway
Addressable Remote Transducer (HART) capabilities
and satisfies the HART physical layer requirements.
The device integrates the modulation and demodulation
of the 1200Hz/2200Hz FSK signal, has very low power
consumption, and needs only a few external compo-
nents due to the integrated digital signal processing.
The input signal is sampled by an analog-to-digital con-
verter (ADC), followed by a digital filter/demodulator.
This architecture ensures reliable signal detection in
noisy environments. The output digital-to-analog con-
verter (DAC) generates a sine wave and provides a
clean signal with phase-continuous switching between
1200Hz and 2200Hz. Low power is achieved by dis-
abling the receive circuits during transmit and vice
versa. The DS8500 is ideal for low-power process con-
trol transmitters.
Rev 1; 2/09
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.
TOP VIEW
*EXPOSED PAD.
D_OUT
4–20mA Loop-Powered Transmitters for
Temperature, Pressure, Flow, and Level
Measurement
HART Multiplexers
HART Modem Interface Connectivity
DGND
DGND
DGND
D_IN
16
17
18
19
20
________________________________________________________________ Maxim Integrated Products
+
15
1
(5mm
14
2
THIN QFN
General Description
DS8500
13
×
3
Pin Configuration
5mm)
12
4
*EP
11
Applications
5
10 XCEN
9
8
7
6
DGND
XTAL2
XTAL1
RTS
♦ Single-Chip, Half-Duplex, 1200bps FSK
♦ Digital Signal Processing Provides Reliable Input
♦ Sinusoidal Output Signal with Lowest Harmonic
♦ Few External Components Enable a Space-Saving
♦ Standard Component 3.6864MHz Crystal
♦ Complies to HART Physical Layer Requirements
♦ 2.7V to 3.6V Operating Voltage
♦ 285µA (max) Current Consumption
♦ Space-Saving, 5mm x 5mm x 0.8mm, 20-Pin TQFN
+ Denotes a lead(Pb)-free/RoHS-compliant package.
* EP = Exposed pad.
DS8500-JND+
Modulation and Demodulation
Signal Detection in Noisy Conditions
Distortion
Solution
Package
PART
-40°C to +85°C
TEMP RANGE
Ordering Information
HART Modem
PIN-PACKAGE
20 TQFN-EP*
Features
1

Related parts for DS8500-JND+

DS8500-JND+ Summary of contents

Page 1

... Standard Component 3.6864MHz Crystal ♦ Complies to HART Physical Layer Requirements ♦ 2.7V to 3.6V Operating Voltage ♦ 285µA (max) Current Consumption ♦ Space-Saving, 5mm x 5mm x 0.8mm, 20-Pin TQFN Package Applications PART DS8500-JND+ + Denotes a lead(Pb)-free/RoHS-compliant package Exposed pad XCEN DGND 9 8 ...

Page 2

HART Modem ABSOLUTE MAXIMUM RATINGS Voltage Range on All Pins (including AVDD, DVDD) Relative to Ground .................................-0.5V to +3.6V Voltage Range on Any Pin Relative to Ground Except AVDD, DVDD .............-0. Stresses beyond those listed under “Absolute Maximum ...

Page 3

... XTAL1 CRYSTAL OSCILLATOR XTAL2 XCEN OCD Rx DEMODULATOR D_OUT RTS Tx MODULATOR D_IN _______________________________________________________________________________________ FUNCTION . P-P . P-P RST DVDD DGND AGND AVDD V REF 1.23V CLOCK POWER GENERATOR MONITOR DIGITAL SAMPLE/HOLD FILTER ADC DAC DS8500 HART Modem Pin Description Block Diagram REF FSK_IN FSK_OUT 3 ...

Page 4

... R1 and R2 provides an input bias voltage of V the ADC input (R1 = R2). The output DAC provides a sine-wave signal, and C4 provides the AC-coupled signal output from the DS8500. The typical value of C4 can be anything greater than 20nF based on the application. For technical support ic.com/micro. ...

Page 5

... D_IN START FSK_OUT Figure 2. Actual DS8500 Modulator Waveform FSK_IN D_OUT Figure 3. Actual DS8500 Demodulator Waveform _______________________________________________________________________________________ 8-BIT DATA START 8-BIT DATA 1200bps/833μs ONE UART CHARACTER (START, 8 DATA BITS, PARITY, STOP) HART Modem STOP PARITY STOP PARITY 5 ...

Page 6

... For the latest package outline information and land patterns www.maxim-ic.com/packages. PACKAGE TYPE 20 TQFN 6 _______________________________________________________________________________________ RST DVDD DGND AGND AVDD V REF CLOCK POWER 1.23V GENERATOR MONITOR DIGITAL SAMPLE/HOLD FILTER ADC DS8500 DAC PACKAGE CODE T2055+3 POWER SUPPLY 2.7V TO 3.6V REF FSK_IN HART HART AND 4–20mA FSK_OUT OUT 4–20mA ...

Page 7

... Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 _____________________ 7 © 2009 Maxim Integrated Products ...

Related keywords